การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Hand-Forged Horseshoe Nails: Drawn from Nail Rod, Cut on the Sett, Headed in a Nail-Former, Point Set Cold (Edwinson, 1886)
Forge

สร้างโดย

Forge

14. พฤศจิกายน 2026NO
10
0
0
0
0

Hand-Forged Horseshoe Nails: Drawn from Nail Rod, Cut on the Sett, Headed in a Nail-Former, Point Set Cold (Edwinson, 1886)

How country smiths made their own horseshoe nails, from George Edwinson's farriery chapter in Amateur Work (1886): the best nail rod (or rod welded up from old nails) drawn to a point, cut off on the sett, headed in a nail-former with a shallow countersink, cooled slowly in the scale, then finished cold with the point bent slightly so it clenches in the right place.
ระดับกลาง
A few minutes per nail once practised

คำแนะนำ

1

His lengths

กำลังโหลดสมุด Jupyter…
2

Read Edwinson

"The worthy smiths used to make their own horse-shoe nails, either from the very best nailing rods ... or from nail rods made by themselves."
3

Get nail rod

Use the best nail rod, sized to the upper part of the nail head. Or make it: faggot old horseshoe nails with scraps of nail rod, bound with iron wire, weld the faggot in the forge and draw it out into rod.

วัสดุสำหรับขั้นตอนนี้:

เส้นเหล็กดัดเส้นเหล็กดัด1 ชิ้น
ลวดเหล็กดัดลวดเหล็กดัด1 ชิ้น

เครื่องมือที่ต้องใช้:

เตาตีเหล็กของช่างตีเหล็กเตาตีเหล็กของช่างตีเหล็ก
ทั่งทั่ง
ค้อนค้อน
คีมช่างตีเหล็กคีมช่างตีเหล็ก
4

Draw and cut

Heat the rod and draw the nail shank to shape on the anvil. Hold it on the sett and cut it off with one blow, nicking off just enough metal above the shank to form the head. Usual lengths 1 1/2, 1 3/4, 1 7/8, 2 and 2 1/2 in. (38-64 mm).

เครื่องมือที่ต้องใช้:

เตาตีเหล็กของช่างตีเหล็กเตาตีเหล็กของช่างตีเหล็ก
ทั่งทั่ง
ค้อนค้อน
สกัดตัดบนทั่งสกัดตัดบนทั่ง
5

Head it

Drive the head into a nail-former with a shallow countersink, not a steep one: a tapered head wears loose and breaks off (his fig. 99, A old style, B right). Expert smiths shape the shoulders with the hammer and sett alone.

เครื่องมือที่ต้องใช้:

แผ่นขึ้นหัวตะปูแผ่นขึ้นหัวตะปู
ค้อนค้อน
6

Cool slowly

Let each nail fall among the scale at the foot of the anvil block and scatter them on scale or ashes. Never let them fall on iron or cool in a heap: they turn brittle.

เครื่องมือที่ต้องใช้:

ทั่งทั่ง
7

Finish cold

On a small anvil held in the vice, touch the heads into shape with a light hammer, sharpen the points by hammering, and bend each point a little (fig. 99 C) so it comes out at the right height on the hoof wall for the clench (fig. 100).

เครื่องมือที่ต้องใช้:

ปากกาจับชิ้นงานหน้าโต๊ะปากกาจับชิ้นงานหน้าโต๊ะ
ทั่งทั่ง
ค้อนค้อน
8

Troubleshooting

Horseshoe nail troubleshooting.

Flow

Loading...
9

History and honest limits

From George Edwinson, "Smithing and Forging" VI, **Amateur Work, Illustrated**, vol. V (1886), pp. 509-511 and figs. 96-100 (checked on the archive.org scan amateurworkillus05lond), drawing in part on W. J. E. Crane, The Smithy and Forge. He gives no nail rod section; the metric figures and tools are ours.

วัสดุ

2

เครื่องมือที่จำเป็น

7

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...