ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Filter Press: Iron Plates and Frames Clamped by a Jack-Screw (Spencer, 1917)
The sugar-house filter press: a row of iron plates and frames, each covered with filter cloth, hung on a heavy framework and squeezed together by a strong jack-screw. The cloth itself seals the joints. Mud pumped in collects as cake in the frames, and the clear liquid runs out through cocks on the plates.
Result: a plate-and-frame filter press that works best at about 40 lb per square inch.
Source: G. L. Spencer, A Handbook for Cane-Sugar Manufacturers (1917), pp. 66-67. Unknown: sizes and the number of chambers. Picture: a drawn diagram.
ขั้นสูง
Unknown
คำแนะนำ
1
1
Make the plates and frames
Make the plates and frames
Make the plates and frames of iron, with outlet openings and cocks on the plates for the filtered liquid. For a frame (side-feed) press, cast a lug on each frame and plate with an opening, so the lugs line up into a mud channel. For a centre-feed press, make heavy recessed plates with a round opening in each instead. Ours: iron castings. Not given: sizes, the number of chambers.
วัสดุสำหรับขั้นตอนนี้:
ชิ้นงานเหล็กหล่อ1 plates and frames
วาล์วที่ไม่ทราบ1 outlet cocksเครื่องมือที่ต้องใช้:
เครื่องกัด
สว่านแท่น
ขนาดที่ไม่ทราบ2
2
Build the frame and jack-screw
Build the frame and jack-screw
Build a heavy framework that carries the plates and frames in a row, with a powerful jack-screw at one end to clamp them together. Not given: the framework's sizes and metal.
วัสดุสำหรับขั้นตอนนี้:
โลหะที่ไม่ทราบ1 framework and jack-screwเครื่องมือที่ต้องใช้:
สว่านแท่น
ขนาดที่ไม่ทราบ3
3
Dress it with cloth
Dress it with cloth
Hang a heavy cotton filter cloth over each plate, with a thin cotton cloth over it to protect it from wear; the cloth makes the joints between plates and frames. In a frame press the cloth has no hole, and rubber rings or cloth 'stockings' seal between the lugs. In a centre-feed press, cut a hole in the cloth to match each plate's opening and clamp the cloth to the plate there. Screw the pack tight.
วัสดุสำหรับขั้นตอนนี้:
ผ้าฝ้ายกรองเนื้อหยาบ1 heavy cloths
ผ้ากรองฝ้ายเนื้อละเอียด1 thin cover cloths
แผ่นยางธรรมชาติ1 lug ringsเครื่องมือที่ต้องใช้:
กรรไกร4
4
Steam it and press
Steam it and press
Before use, blow steam through the press until it comes freely from the cocks. Pump the mud in: about 40 lb per square inch gives very good work, and juice is pumped in at up to about 45 lb. More pressure risks breaking the press and blinding the cloths. The solids collect in the frames and the clear liquid runs off at the cocks. To wash the cake, close the cocks on the water plates and force water through it. Ours: a diaphragm pump.
เครื่องมือที่ต้องใช้:
หม้อไอน้ำ
ปั๊มไดอะแฟรมวัสดุ
6- 1 plates and framesตัวยึดตำแหน่ง
- 1 outlet cocksตัวยึดตำแหน่ง
- 1 framework and jack-screwตัวยึดตำแหน่ง
- 1 heavy clothsตัวยึดตำแหน่ง
- 1 thin cover clothsตัวยึดตำแหน่ง
- 1 lug ringsตัวยึดตำแหน่ง
วัสดุจากพิมพ์เขียวที่เชื่อมต่อ

การระบุ 10%
Casting Iron in a Cupola Furnace — Re-Melting Pig Iron into Finished Castings
โดย Piett
งานโลหะ
54
0
0
0
6
0

การระบุ 10%
Plain-Weave Cotton Cloth on a Rigid Heddle Loom
โดย Tex
สิ่งทอและหนัง
45
0
0
0
1
0

การระบุ 10%
Steam Boiler: Small Brass Shell Boiler, Screwed and Soldered (Hopkins, Model Engines and Small Boats, 1898)
โดย Volt
อุณหพลศาสตร์
15
0
0
0
2
0
พิมพ์เขียวนี้สร้าง
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้
