ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Handle: a Wired Tinplate Lifting Handle, Riveted and Soldered On (Hasluck, 1907)
Forge

สร้างโดย

Forge

4. พฤศจิกายน 2026NO
15
0
0
0
0

Handle: a Wired Tinplate Lifting Handle, Riveted and Soldered On (Hasluck, 1907)

A tinsmith's lifting handle is a strip of tinplate cut to a tapering pattern, stiffened with wire along its edges and bent so its narrow end curls into a ring, then riveted and soldered to the vessel. Paul N. Hasluck's Tinplate Work (1907) gives it for the strainer of a fish kettle (Figs. 185-186). He gives no sizes for the pattern or the wire; those are unknown here. Source: P. N. Hasluck, Tinplate Work (1907), pp. 89-90. Picture: his Figs. 185 and 186.
เริ่มต้น
An hour for a pair

คำแนะนำ

1

Read Hasluck

"Having cut two to this pattern, wire the edges, and bend to the shape of Fig. 186, letting the narrow part of the pattern form the ring; then rivet and solder them to the strainer."
2

Cut to the pattern

Mark out the handle on tinplate to the pattern of Fig. 185, a long strip tapering to a narrow end, and cut it out with snips; cut two for a pair. Hasluck gives no sizes (unknown).

วัสดุสำหรับขั้นตอนนี้:

แผ่นเหล็กชุบดีบุกแผ่นเหล็กชุบดีบุก1 two strips

เครื่องมือที่ต้องใช้:

เหล็กขีดเหล็กขีด
กรรไกรตัดแผ่นโลหะกรรไกรตัดแผ่นโลหะ
ขนาดที่ไม่ทราบขนาดที่ไม่ทราบ
3

Wire the edges

Wire the edges of each strip: The gauge for the handles is not given; the strainer they are made for is wired with No. 10 B.W.G. tinned wire.

วัสดุสำหรับขั้นตอนนี้:

ลวดเหล็กดัดลวดเหล็กดัด1 edges

เครื่องมือที่ต้องใช้:

ค้อนไม้ค้อนไม้
หลักหลัก
4

Bend the ring

Bend the strip to the shape of Fig. 186, curling the narrow end of the pattern round into the ring you lift by.

เครื่องมือที่ต้องใช้:

ค้อนไม้ค้อนไม้
หลักหลัก
5

Rivet and solder on

Punch the rivet holes, rivet the flat end of the handle to the vessel, and solder it.

วัสดุสำหรับขั้นตอนนี้:

หมุดย้ำเหล็กหมุดย้ำเหล็ก1 per handle
ตะกั่วบัดกรีดีบุก-ตะกั่วตะกั่วบัดกรีดีบุก-ตะกั่ว1 small amount

เครื่องมือที่ต้องใช้:

เครื่องเจาะรูแผ่นโลหะเครื่องเจาะรูแผ่นโลหะ
ค้อนย้ำหมุดค้อนย้ำหมุด
หัวแร้งไฟฟ้าหัวแร้งไฟฟ้า
ฟลักซ์ฟลักซ์
6

History and honest limits

In Hasluck this handle lifts the perforated strainer out of a fish kettle; his colander has a pair of bow handles riveted on opposite each other. He gives the pattern by figure only, with no sizes, and does not say which wire goes in the handle edges; the tools are ours.

วัสดุ

4

เครื่องมือที่จำเป็น

9

พิมพ์เขียวนี้สร้าง

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...