การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Saddler's Stitching Clam From Two Oak Barrel Staves on a Dovetailed Deal Base (Hasluck, Harness Making, 1904)
Woody

สร้างโดย

Woody

14. พฤศจิกายน 2026NO
6
0
0
0
0

Saddler's Stitching Clam From Two Oak Barrel Staves on a Dovetailed Deal Base (Hasluck, Harness Making, 1904)

The home-made saddler's clamp from P. N. Hasluck's Harness Making (1904): two curved oak barrel staves, 2 ft long, screwed into a dovetail tenon on a 20 in deal block so their thinned upper ends spring tightly together as jaws. Held slanting between the knees, it grips the work while both hands stitch.
ระดับกลาง
About half a day

คำแนะนำ

1

Parts in centimetres

กำลังโหลดสมุด Jupyter…
2

Read Harness Making

"A clamp can be made easily by the worker at home."
3

Shape the staves

Cut two oak cask or barrel staves 2 ft long and at least 3 in wide, the most curved part in the centre (the more bent, the more useful). Clean the outside with a spokeshave, leaving one end the full thickness (about 1 in) and thinning gradually to about 3/4 in toward the upper ends, which form the jaws (Fig. 55). Round the outer corners, flatten the inside, and glass-paper both sides.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้ถังไม้แผ่นไม้ถังไม้2 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
กบสองมือจับกบสองมือจับ
กระดาษทรายกระดาษทราย
4

Cut the base

Cut the lower part C from sound white deal, 20 by 3 by 3 in, with a dovetail-shaped tenon at least 6 in long. Fit the shoulders and the width of its upper end to the curve of your staves so that it takes energetic screwing to bring the staves home and their jaws press tightly together.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้สนแผ่นไม้สน1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
สิ่วสิ่ว
ค้อนไม้ค้อนไม้
กบไสไม้กบไสไม้
5

Screw together

Screw the staves to the tenon with eight stout 2-1/4 in screws, countersunk flush (Fig. 54).

วัสดุสำหรับขั้นตอนนี้:

สกรูไม้สกรูไม้8 ชิ้น

เครื่องมือที่ต้องใช้:

สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก
ชุดดอกลบมุมรูชุดดอกลบมุมรู
ไขควงปากแบนไขควงปากแบน
6

Use it

Hold the clamp slanting between the knees, resting against the left knee, with the right leg thrown over it, so the work is held fast between the jaws and both hands are free for the awl and two needles.
7

Troubleshooting

Clamp troubleshooting.

Flow

Loading...
8

History and honest limits

From Paul N. Hasluck, **Harness Making** (1904), "Harness-makers' Tools" (checked on the archive.org scan harnessmaking00hasl, pp. 24-27). The tools and metric figures are ours.

วัสดุ

3
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • 8 ชิ้น
    ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

9

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...