การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Martingale: Neck Strap and Slit Breast Strap With Rings (Hasluck, Saddlery, 1904)
Tex

สร้างโดย

Tex

13. พฤศจิกายน 2026FO
2
0
0
0
0

Martingale: Neck Strap and Slit Breast Strap With Rings (Hasluck, Saddlery, 1904)

A martingale runs from the girth up between the horse's forelegs and stops it throwing its head too high. This is the martingale from Paul N. Hasluck's Saddlery (1904), as in his Fig. 11: a neck strap about 4 ft 6 in long, and a breast strap slit at the top into two branches, each ending in a ring for the reins. Every size is his; he does not give the size of the rings.
ระดับกลาง
About 1 day

คำแนะนำ

1

His sizes in centimetres

กำลังโหลดสมุด Jupyter…
2

Read Saddlery, ch. V

"Martingales (Fig. 11) are made with straps round the neck, either flat or round, and with or without a buckle; the total length is about 4 ft. 6 in., and the flat strap is 3/4 in. wide."
3

Make the neck strap

Cut the neck strap about 4 ft 6 in long and 3/4 in wide. With a buckle: place a piece of leather about 1 ft 3 in from the buckle for the breast strap and stitch it at both ends, so it makes an opening. Round the rest of the neck strap, leaving about 1 ft flat for a 3/4 in buckle. Without a buckle, make the opening by simply overlapping the ends, leaving enough space between the two splices for the breast strap.

วัสดุสำหรับขั้นตอนนี้:

หนังทำเครื่องม้าหนังทำเครื่องม้า1 ชิ้น
เชือกเส้นเล็กเชือกเส้นเล็ก1 ชิ้น
หัวเข็มขัดเหล็กมีลิ้นหัวเข็มขัดเหล็กมีลิ้น1 ชิ้น
ด้ายลินินด้ายลินิน1 ชิ้น
ขี้ผึ้งขี้ผึ้ง1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดตัดหนังมีดตัดหนัง
แผ่นไม้ร่องแผ่นไม้ร่อง
เครื่องมือลบมุมขอบเครื่องมือลบมุมขอบ
เครื่องมือขัดขอบหนังเครื่องมือขัดขอบหนัง
เครื่องมือกรีดพับเครื่องมือกรีดพับ
หัวพ่นไฟโพรเพนหัวพ่นไฟโพรเพน
เหล็กหมาด (สว่านเจาะรูมือ)เหล็กหมาด (สว่านเจาะรูมือ)
เข็มเย็บอานม้าสองเล่มเข็มเย็บอานม้าสองเล่ม
ปากคีบไม้สำหรับเย็บหนังปากคีบไม้สำหรับเย็บหนัง
ตลับเมตรตลับเมตร
4

Cut and slit the breast strap

Cut the breast strap 1-1/4 in wide and 4 ft long and slit it for 1 ft 1 in. It may be flat or round; a round one must be cut wider to begin with, say 1-5/8 in, and then slit in half.

วัสดุสำหรับขั้นตอนนี้:

หนังทำเครื่องม้าหนังทำเครื่องม้า1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดตัดหนังมีดตัดหนัง
ตลับเมตรตลับเมตร
5

Make the girth loop

For a flat strap, narrow it at the unslit end for 1 ft 6 in from the end. Fix a 1 in buckle there the reverse way and buckle the strap back on itself to form a loop for the girth. Fit this buckle before the rings.

วัสดุสำหรับขั้นตอนนี้:

หัวเข็มขัดเหล็กมีลิ้นหัวเข็มขัดเหล็กมีลิ้น1 ชิ้น
ด้ายลินินด้ายลินิน1 ชิ้น
ขี้ผึ้งขี้ผึ้ง1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดตัดหนังมีดตัดหนัง
เครื่องมือลบมุมขอบเครื่องมือลบมุมขอบ
เครื่องมือขัดขอบหนังเครื่องมือขัดขอบหนัง
เครื่องมือกรีดพับเครื่องมือกรีดพับ
หัวพ่นไฟโพรเพนหัวพ่นไฟโพรเพน
เหล็กหมาด (สว่านเจาะรูมือ)เหล็กหมาด (สว่านเจาะรูมือ)
เข็มเย็บอานม้าสองเล่มเข็มเย็บอานม้าสองเล่ม
เครื่องเจาะรูหนังเครื่องเจาะรูหนัง
6

Put on the rings and finish

Put a ring on the end of each slit branch, as in Fig. 11; he does not give the ring size. Then run the buckle end of the breast strap through the opening in the neck strap, and the martingale is complete.

วัสดุสำหรับขั้นตอนนี้:

ห่วงเครื่องเทียมม้าห่วงเครื่องเทียมม้า2 ชิ้น
ด้ายลินินด้ายลินิน1 ชิ้น
ขี้ผึ้งขี้ผึ้ง1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดตัดหนังมีดตัดหนัง
เหล็กหมาด (สว่านเจาะรูมือ)เหล็กหมาด (สว่านเจาะรูมือ)
เข็มเย็บอานม้าสองเล่มเข็มเย็บอานม้าสองเล่ม
ปากคีบไม้สำหรับเย็บหนังปากคีบไม้สำหรับเย็บหนัง
7

Troubleshooting

Martingale troubleshooting.

Flow

Loading...
8

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter V, martingales, pp. 45-47, Fig. 11 on p. 43; every fraction was read on the scan. He names the rings but gives no size for them, and does not say how they are fixed to the branches: follow Fig. 11. The combined martingale and breastplate on p. 45 is not made here. The thread, tools and metric figures are ours.

วัสดุ

6

เครื่องมือที่จำเป็น

11

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...