ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Hand-Crank Drill Press in a Wooden Frame, with a Screw-Fed Table (Boy Mechanic, 1915)
Forge

สร้างโดย

Forge

14. พฤศจิกายน 2026NO
12
0
0
0
0

Hand-Crank Drill Press in a Wooden Frame, with a Screw-Fed Table (Boy Mechanic, 1915)

A cheap drill press for iron and brass: the chuck of an old carpenter's brace on a cranked shaft running in a brass bearing through one post of a wooden frame, and a sliding table pushed up against the drill by a 1/2 in bolt through the opposite post.
ระดับกลาง
A day

คำแนะนำ

1

Read the Boy Mechanic

"A broken carpenter's brace furnished the chuck, which was fastened to a 1/2-in. shaft having a detachable crank."
2

Build the frame

Make a frame of two end posts about 3 in wide joined by side rails about 1 in by 2 in, as in the drawing. Bore a hole for the chuck shaft through one post and for the feed bolt through the other, on one line and exactly central.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้เนื้อแข็งแผ่นไม้เนื้อแข็ง1 ชิ้น
สกรูไม้สกรูไม้1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก
ค้อนค้อน
3

Fit the chuck shaft

Press a brass tube tightly into the hole in the first post as a bearing. Fasten the chuck from a broken brace to a 1/2 in shaft running in the tube, with a detachable crank on the outer end.

วัสดุสำหรับขั้นตอนนี้:

สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก1 ชิ้น
เหล็กเส้นกลมเหล็กกล้าละมุนเหล็กเส้นกลมเหล็กกล้าละมุน1 ชิ้น
ท่อทองเหลืองท่อทองเหลือง1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยตัดเหล็กเลื่อยตัดเหล็ก
ตะไบ (ตะไบมือ)ตะไบ (ตะไบมือ)
4

Make the sliding table

Make the table from a post like the end posts with guides that keep it in line between the rails. Fix a plate on its underside where the bolt bears.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้เนื้อแข็งแผ่นไม้เนื้อแข็ง1 ชิ้น
เหล็กแบนกล้าละมุนเหล็กแบนกล้าละมุน1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
5

Fit the feed screw

Fasten a square nut in the opposite post and run a 1/2 in machine bolt through it to push the table up against the drill. A crank can be fitted to the bolt.

วัสดุสำหรับขั้นตอนนี้:

ชุดสลักเกลียวหกเหลี่ยมคละขนาดชุดสลักเกลียวหกเหลี่ยมคละขนาด1 ชิ้น
น็อตหกเหลี่ยมน็อตหกเหลี่ยม1 ชิ้น

เครื่องมือที่ต้องใช้:

สิ่วสิ่ว
6

Troubleshooting

Hand drill press troubleshooting.

Flow

Loading...
7

History and honest limits

From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 242, by L. R. Kelley (checked on the archive.org scan boymechanicbook200chic2). Only the shaft, bolt and drawing sizes are his; the wood and fixings are ours.

วัสดุ

8

เครื่องมือที่จำเป็น

6

พิมพ์เขียวนี้สร้าง

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...