ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Two-Point Marking Gauge from a Pipe Tee and Wing Bolt (Boy Mechanic, 1915)
Forge

สร้างโดย

Forge

14. พฤศจิกายน 2026NO
14
0
0
0
0

Two-Point Marking Gauge from a Pipe Tee and Wing Bolt (Boy Mechanic, 1915)

A small scribing gauge built in a 3/8 in pipe tee: two flat steel bars with bent, sharpened points slide through a slot in a wood plug filling the tee, and a wing bolt screwed through a bushing in the side outlet locks them at the set distance.
ระดับกลาง
Two hours

คำแนะนำ

1

Read the Boy Mechanic

"After the points have been drawn out to the right distance, the wing bolt is turned to hold them in that position."
2

Tee and bushing

Screw a 3/8 in bushing into the side outlet of a 3/8 in pipe tee and tap the bushing to take a 7/16 in wing bolt.

วัสดุสำหรับขั้นตอนนี้:

ข้อต่อท่อเกลียวข้อต่อท่อเกลียว1 ชิ้น
บูชโลหะบูชโลหะ1 ชิ้น

เครื่องมือที่ต้องใช้:

ชุดต๊าปและดายทำเกลียวชุดต๊าปและดายทำเกลียว
ปากกาจับชิ้นงานหน้าโต๊ะปากกาจับชิ้นงานหน้าโต๊ะ
3

Plug and slot

Drive a tight-fitting wood plug through the run of the tee, grind its ends flush on an emery wheel, and cut a slot 5/16 in square through the plug just under the bushing.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้เนื้อแข็งแผ่นไม้เนื้อแข็ง1 ชิ้น

เครื่องมือที่ต้องใช้:

ล้อเจียรล้อเจียร
สิ่วสิ่ว
เลื่อยมือเลื่อยมือ
4

Make the points

Cut two pieces of flat steel 1/4 in wide, 1/8 in thick and 1/8 in longer than the tee. Bend the outer end of each at right angles and sharpen it to a point. Fit both in the slot, one from each side.

วัสดุสำหรับขั้นตอนนี้:

เหล็กแบนกล้าละมุนเหล็กแบนกล้าละมุน1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยตัดเหล็กเลื่อยตัดเหล็ก
ปากกาจับชิ้นงานหน้าโต๊ะปากกาจับชิ้นงานหน้าโต๊ะ
ตะไบ (ตะไบมือ)ตะไบ (ตะไบมือ)
ค้อนค้อน
5

Set and lock

Draw the points out to the distance you want and turn the wing bolt down onto the bars to hold them.
6

Troubleshooting

Pipe-tee gauge troubleshooting.

Flow

Loading...
7

History and honest limits

From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 294, by C. Molloy (checked on the archive.org scan boymechanicbook200chic2). The tool list is ours.

วัสดุ

4

เครื่องมือที่จำเป็น

8

พิมพ์เขียวนี้สร้าง

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...