การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Cigar-Box Hawaiian Ukulele: Spanish-Cedar Body, 11 in Neck and Frets by the Rule of Eighteen (Boy Mechanic, 1919)
Woody

สร้างโดย

Woody

14. พฤศจิกายน 2026NO
9
0
0
0
0

Cigar-Box Hawaiian Ukulele: Spanish-Cedar Body, 11 in Neck and Frets by the Rule of Eighteen (Boy Mechanic, 1919)

S. H. Samuels's ukulele from The Boy Mechanic, Book 3 (1919), made for 30 cents: a Spanish-cedar cigar box rebuilt as a 9 x 6 in body with a 2-1/2 in sound hole, an 11 in cedar or mahogany neck, a notched hardwood bridge, and aluminium frets set by the old rule of 1/18 on a 13 in string length.
ระดับกลาง
About 2 days

คำแนะนำ

1

Fret table

กำลังโหลดสมุด Jupyter…
2

Read The Boy Mechanic, Book 3

"The size of this instrument makes it especially suited to the cigar-box type of body construction."
3

Rebuild the box as the body

Take a good Spanish-cedar cigar box about 2-1/2 by 6 by 9 in, soak off the paper without marring the wood, take it apart and trim edges with too many or broken nail holes. Fit the parts so top and bottom rest against the sides and ends, the ends between the sides (Fig. 2; drawn 9 by 6 by 2-1/4 in). Cut a 2-1/2 in hole in the top 3-3/4 in from the neck end. Make corner strips A 1/4 in square and strips B 1/4 by 5/8 by 4-1/2 in for under the top and on the bottom.

วัสดุสำหรับขั้นตอนนี้:

ไม้กระดานซีดาร์ไม้กระดานซีดาร์1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยฉลุเลื่อยฉลุ
มีดตัดหนังมีดตัดหนัง
กบไสไม้กบไสไม้
เข็มทิศเข็มทิศ
ไม้บรรทัดไม้บรรทัด
4

Make the neck, nut and bridge

Cut the neck from Spanish cedar or mahogany, 11 in long, best in one piece (or with the peg extension and the wide body end glued on and doweled): head 4-1/2 in, fingerboard 6-5/8 in from the 1/8 in nut, 1-1/4 in wide at the nut and 1-3/4 in at the body, heel 7/16 in, section 7/8 by 2-1/4 in as drawn (Fig. 3). Make the nut D of mahogany or walnut with the grain lengthwise, notched for the strings as spaced. Make the bridge C of hard wood, 2-1/2 in long and 1/2 in high, hollowed under the notched edge, with a metal string contact.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้เนื้อแข็งแผ่นไม้เนื้อแข็ง1 ชิ้น
เดือยไม้เดือยไม้1 ชิ้น
กาวสัตว์กาวสัตว์1 ชิ้น
แถบทองเหลืองแถบทองเหลือง1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
เลื่อยฉลุเลื่อยฉลุ
มีดตัดหนังมีดตัดหนัง
ตะไบ (ตะไบมือ)ตะไบ (ตะไบมือ)
สว่านมือสว่านมือ
5

Fret the fingerboard

Measure the string length from the bridge contact to the nut (13 in here). Set the first fret 1/18 of that distance from the nut, the second 1/18 of the distance from the first fret to the bridge, and so on (notebook). Cut grooves 1/8 in deep and drive in frets of aluminium (or brass) 1/16 by 3/16 in, tight enough to need no fastening.

วัสดุสำหรับขั้นตอนนี้:

แถบทองเหลืองแถบทองเหลือง1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
เลื่อยตัดเหล็กเลื่อยตัดเหล็ก
ตะไบ (ตะไบมือ)ตะไบ (ตะไบมือ)
ไม้บรรทัดไม้บรรทัด
ดินสอดินสอ
ค้อนค้อน
6

Assemble and finish

Glue the body's end to the neck with animal glue, reinforced by screws, its upper edge parallel with the fingerboard and the fingerboard flush with the top. Glue the body (without the top) to that end; when dry, glue in the strips, bridge and finally the top. Clean, sandpaper, stain and shellac or varnish. Fit tuning pegs (bought or made) and a set of strings.

วัสดุสำหรับขั้นตอนนี้:

กาวสัตว์กาวสัตว์1 ชิ้น
สกรูไม้สกรูไม้1 ชิ้น
กระดาษทรายกระดาษทราย1 ชิ้น
น้ำมันเคลือบเชลแล็กน้ำมันเคลือบเชลแล็ก1 ชิ้น
ลูกบิดตั้งสายลูกบิดตั้งสาย4 ชิ้น
สายอูคูเลเล่สายอูคูเลเล่1 ชิ้น

เครื่องมือที่ต้องใช้:

แคลมป์แบบบาร์แคลมป์แบบบาร์
ไขควงปากแบนไขควงปากแบน
แปรงทาสีหน้ากว้างแปรงทาสีหน้ากว้าง
7

Troubleshooting

Ukulele troubleshooting.

Flow

Loading...
8

History and honest limits

From "A Homemade Hawaiian Ukulele" by S. H. Samuels, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, pp. 358-359). He gives the box as about 2-1/2 in deep; his drawing shows 2-1/4 in. He names no stain and no string type. The fret table, its equal-temperament comparison and the metric figures are ours.

วัสดุ

10

เครื่องมือที่จำเป็น

14

พิมพ์เขียวนี้สร้าง

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...