ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Redditch Steel Sewing Needles: Point, Stamp, Eye, Harden, Scour and Drill (Tomlinson, 1854)
How the Redditch needle mills of the 1850s made steel sewing needles, from Tomlinson's Cyclopaedia of Useful Arts: wire cut in double lengths, pointed on grit stones, stamped and punched for two eyes, split, hardened and tempered blue, then scoured bright for days in rolled canvas bundles with emery and oil.
ขั้นสูง
About two weeks per lot (scouring alone 50-60 hours)
คำแนะนำ
1
1
Gauge and rates
Gauge and rates
กำลังโหลดสมุด Jupyter…
2
2
Read the Cyclopaedia of Useful Arts
Read the Cyclopaedia of Useful Arts
"The raw material, as received from Birmingham or Sheffield, consists of soft, clean steel wire."
3
3
Cut and straighten
Cut and straighten
Cut soft steel wire into lengths of two needles each, about 3 in (76 mm) for size No. 6. Collect several thousand inside two heavy iron rings, heat them to redness, lay them on an iron plate and roll them back and forth with a smooth file between the rings until the grating sound softens: they are then straight.
วัสดุสำหรับขั้นตอนนี้:
ลวดเหล็ก1 ชิ้นเครื่องมือที่ต้องใช้:
คีมตัดลวดปากเฉียง
เตาตีเหล็กของช่างตีเหล็ก
แผ่นเหล็ก
ตะไบ (ตะไบมือ)
คีมช่างตีเหล็ก4
4
Point both ends
Point both ends
Grind both ends on a fast grit stone (10-20 in across, by needle size). Spread the wires in the left hand, hold them with the right and roll them so each forms a true cone. Dip them in water to keep them cool. The dust of grit and steel causes grinder's asthma: he urged a mask and a fan-driven ventilating shaft; wear a dust mask and extract the dust.
เครื่องมือที่ต้องใช้:
หินลับแบบหมุน
ถังชุบน้ำ
หน้ากากกันฝุ่น5
5
Stamp the eyes
Stamp the eyes
Lay each blank on the iron bed of the stamp (half a die, on a stone block), push it to the stop, and drop the 12 lb hammer with the other half of the die by its foot lever. One blow gives the grooves and a dent for each of the two eyes.
เครื่องมือที่ต้องใช้:
ค้อนตกพร้อมแม่พิมพ์ตีขึ้นรูป6
6
Punch the eyes
Punch the eyes
In a small hand press with two steel points the size of the eye, punch both eyes through. File off the burr from many at once spitted on two fine wires through the eyes, then bend the row back and forth between the spits so it breaks into two rows of single needles. Grip each row in a hand vice and file the heads to shape.
เครื่องมือที่ต้องใช้:
เครื่องปั๊มเจาะ
ตะไบ (ตะไบมือ)
ด้ามจับดอกสว่านมือ7
7
Straighten soft
Straighten soft
Roll each bent needle on a flat steel plate with a smooth steel file turned up at each end; two or three turns straighten it.
เครื่องมือที่ต้องใช้:
แผ่นเหล็ก
ตะไบ (ตะไบมือ)8
8
Harden and temper
Harden and temper
Spread the needles thickly on narrow iron plates, heat them to red in the furnace and plunge them into cold water or oil. Dry them, then heat them on an iron plate over a fire, stirring them with small iron shovels until a blue oxide forms, and take them off at once. Roll them on a steel slab to find the bent ones and straighten those with a hammer on a small anvil.
วัสดุสำหรับขั้นตอนนี้:
น้ำมันเครื่องจักร1 ชิ้นเครื่องมือที่ต้องใช้:
เตาตีเหล็กของช่างตีเหล็ก
แผ่นเหล็ก
ถังชุบน้ำ
ทั่ง
ค้อน9
9
Scour bright
Scour bright
Lay strings across an open wooden tray, a stout canvas on them, and 40,000-50,000 needles lengthwise in it. Sprinkle emery, oil and soft soap, roll it up and wind strong twine round it into a bundle 2-3 ft long and 3-4 in thick. Work it under the weighted slab of a scouring machine, 20-30 strokes a minute, for 50-60 hours (7 or 8 days for the best needles). Every 8 hours renew the canvas, add fresh polishing putty and oil, and wash the needles in soap and water.
วัสดุสำหรับขั้นตอนนี้:
ผ้าใบ1 ชิ้น
ผงกากเพชร (ผงเอเมอรี)1 ชิ้น
น้ำมันเครื่องจักร1 ชิ้น
สบู่1 ชิ้น
ผงขัดเงา1 ชิ้น
เชือกฝ้าย1 ชิ้นเครื่องมือที่ต้องใช้:
เครื่องขัดถูชิ้นส่วนเล็ก10
10
Head, drill and finish
Head, drill and finish
Turn all heads one way: press a finger wrapped in rag into the heap and the points that stick draw out. Reject broken ones. Anneal the eyes by bringing a red-hot plate near them until dark blue, then countersink and smooth each eye on both sides with a small fast three-sided steel drill. Finish the points on a small turning hone-stone and polish on wooden wheels covered in buff leather with polishing paste.
วัสดุสำหรับขั้นตอนนี้:
ยาขัดเงา1 ชิ้นเครื่องมือที่ต้องใช้:
แผ่นเหล็ก
สว่านแท่น
หินลับมีด
ล้อขัดเงา11
11
Troubleshooting
Troubleshooting
Needle troubleshooting.
Flow
Loading...
12
12
History and honest limits
History and honest limits
From Charles Tomlinson (ed.), **Cyclopaedia of Useful Arts** (1854), vol. II, "Needles" (checked on the archive.org scan cyclopdiaofuse02tomlrich, pp. 321-325). He describes a whole mill; quantities scale down. Metric figures, the dust mask and the tool heads are ours.
วัสดุ
8- 1 ชิ้นตัวยึดตำแหน่ง
- 2 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
เครื่องมือที่จำเป็น
17- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้


