İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Aspirator: a Vessel of Water with a Tap at the Bottom (Sutton, 1904)
The simplest aspirator: a closed vessel of known volume, full of water, with a tap at the bottom. As the water runs out it draws gas in through the apparatus attached to it, and the volume of water run out is the volume of gas drawn through.
Result: an aspirator that draws a measured volume of gas, for example 1/10 cubic foot, through an absorber at a steady rate.
Source: F. Sutton, A Systematic Handbook of Volumetric Analysis (1904), pp. 581-582. Unknown: the vessel's material and the tap. Picture: p. 581 of the book.
Başlangıç
Unknown
Talimatlar
1
1
Fit the vessel
Fit the vessel
Take a vessel of known volume, for example exactly 1/10 cubic foot, and fix a tap at its bottom. Close its mouth tightly with a cork carrying a glass tube, which connects to the absorber the gas is to pass through. Ours: a large clear glass bottle. Not given: the vessel's material, the tap.
Bu adım için malzemeler:
Cam şişe (renksiz)1 aspirator vessel
Bilinmeyen vana1 bottom tap
Mantar tıpalar1 stopper
Cam tüp1 inlet tubeGerekli aletler:
Tezgâh üstü cam üfleme şaloması
Bilinmeyen ölçüler2
2
Set the flow and draw the gas
Set the flow and draw the gas
Fill the vessel with water, connect the absorber, check that everything is tight, and open the tap partly: the small outflow of water draws the gas through the absorber. For an even rate, fit about a yard of tubing to the outlet, for a steady head, ending in a fine jet tried beforehand to give the time wanted; used reversed, the jet clogs less. When the vessel is empty the gas stops, and the water run out measures the gas passed. Collect and measure the water if the vessel is not of fixed volume.
Bu adım için malzemeler:
Lastik Hortum1 outlet tubing
Cam tüp1 jetGerekli aletler:
Dereceli silindirMalzemeler
5- 1 aspirator vesselYer Tutucu
- 1 bottom tapYer Tutucu
- 1 stopperYer Tutucu
- 1 jetYer Tutucu
- 1 outlet tubingYer Tutucu
Gerekli Aletler
3- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Bağlı Plan Malzemeleri

%10 Atıf
Blowing a Glass Bottle by Hand — Free-Blown Vessel Shaping
Forge tarafından
Cam işleme
69
0
0
0
5
0

%10 Atıf
Natural Cork Stoppers from Bark
Woody tarafından
Ağaç işleri
47
0
0
0
3
0

%10 Atıf
Glass Tube: Drawn by Two Glassmakers Walking Apart (Pellatt, 1849)
Charlie tarafından
İnorganik
8
0
0
0
2
0

%10 Atıf
Natural Rubber Tubing, Bands and Sheet: Sulfur-Cured with Heat
Mary tarafından
Kimya
16
0
0
0
2
0
Bu planla yapılan
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.
