İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Self-Righting Jumping Hurdle: Off-Centre Pivoted Swing Between Two Standards (Boy Mechanic, 1915)
Woody

Oluşturan

Woody

13. Kasım 2026NO
8
0
0
0
0

Self-Righting Jumping Hurdle: Off-Centre Pivoted Swing Between Two Standards (Boy Mechanic, 1915)

C. C. Fraser's hurdle from The Boy Mechanic, Book 2 (1915): a 36 by 18 in swing hung on long nails slightly off centre between two standards joined by a reach. It turns at the slightest touch of the jumper's foot and rights itself again.
Başlangıç
About 2 hours

Talimatlar

1

His cutting list in centimetres

Jupyter defteri yükleniyor…
2

Read The Boy Mechanic, Book 2

"The hurdle consists of two standards, a reach, and a swing."
3

Make the swing

Nail four pieces about 7/8 in thick and 1-1/2 in wide into a rectangle: two 36 in long and two 18 in long.

Bu adım için malzemeler:

Çam tahtaÇam tahta1 adet
ÇivilerÇiviler1 adet

Gerekli aletler:

El TesteresiEl Testeresi
ÇekiçÇekiç
Şerit MetreŞerit Metre
Kurşun kalemKurşun kalem
4

Make the standards and reach

Make each standard of three pieces 7/8 in thick, 3 in wide and 18 in long, nailed firmly together as in his figure, and join their bases with a reach of the same stuff, 36 in long.

Bu adım için malzemeler:

Çam tahtaÇam tahta1 adet
ÇivilerÇiviler1 adet

Gerekli aletler:

El TesteresiEl Testeresi
ÇekiçÇekiç
Şerit MetreŞerit Metre
5

Hang the swing

Bore a hole in each standard large enough for a long nail to turn freely but too small for its head to pass, and hang the swing on the nails at its ends, slightly off centre, so it swings at a touch and rights itself.

Bu adım için malzemeler:

ÇivilerÇiviler1 adet

Gerekli aletler:

El matkabıEl matkabı
ÇekiçÇekiç
6

Troubleshooting

Hurdle troubleshooting.

Flow

Loading...
7

History and honest limits

From "How to Make a Hurdle" by C. C. Fraser, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 145). How far off centre the pivots go is not given. The tools and metric figures are ours.

Malzemeler

2

Gerekli Aletler

5

İlgili Blueprint'ler

Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...