İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Inexpensive Bobsled: Barrel-Stave Runners, Block Knees and a Bolted Front Bob (Boy Mechanic, 1915)
Woody

Oluşturan

Woody

13. Kasım 2026NO
6
0
0
0
0

Inexpensive Bobsled: Barrel-Stave Runners, Block Knees and a Bolted Front Bob (Boy Mechanic, 1915)

H. J. Blacklidge's bobsled from The Boy Mechanic, Book 2 (1915): "any boy who can drive a nail and bore a hole can have a bobsled on short notice." Four barrel staves make the runners of two short bobs under a 4 ft board; the front bob turns on a centre bolt and is steered by a rope.
Başlangıç
About 3 hours

Talimatlar

1

His list in centimetres

Jupyter defteri yükleniyor…
2

Read The Boy Mechanic, Book 2

The materials: four good, solid barrel staves; four blocks 4 in long, 4 in wide and 2 in thick; two pieces 12 in long, 4 in wide and 1 in thick; one piece 12 in long, 2 in wide and 1-3/4 in thick; and a good board 4 ft long, 12 in wide and 1 in thick.
3

Make the two bobs

Make each crosspiece-and-knee unit from one 12 x 4 x 1 in piece and two of the blocks, as in his figure, and nail a barrel stave to each side for runners.

Bu adım için malzemeler:

Fıçı tahtasıFıçı tahtası4 adet
Çam tahtaÇam tahta1 adet
Sert Ağaç TahtasıSert Ağaç Tahtası1 adet
ÇivilerÇiviler1 adet

Gerekli aletler:

El TesteresiEl Testeresi
ÇekiçÇekiç
Kurşun kalemKurşun kalem
Şerit MetreŞerit Metre
4

Fit the bobs to the board

Fasten one bob to one end of the board. Attach the other at the centre of its crosspiece with a bolt, so it can turn. Fasten the 1-3/4 by 2 in piece, 12 in long, across the top of the board at the front end.

Bu adım için malzemeler:

Çam tahtaÇam tahta1 adet
Sert Ağaç TahtasıSert Ağaç Tahtası1 adet
Kare boyunlu yuvarlak başlı cıvataKare boyunlu yuvarlak başlı cıvata1 adet
Düz PulDüz Pul2 adet
ÇivilerÇiviler1 adet

Gerekli aletler:

Kol matkabı ve ucuKol matkabı ve ucu
El TesteresiEl Testeresi
ÇekiçÇekiç
5

Fit the steering rope

Fasten a rope to the knees of the front runners; it steers the sled.

Bu adım için malzemeler:

Pamuk halatPamuk halat1 adet

Gerekli aletler:

Kol matkabı ve ucuKol matkabı ve ucu
6

Troubleshooting

Bobsled troubleshooting.

Flow

Loading...
7

History and honest limits

From "An Inexpensive Bobsled" by H. J. Blacklidge, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 49). Which end of the board gets the bolted bob, the bolt size and the stave length come only from his figure or are not given. The tools and metric figures are ours.

Malzemeler

7

Gerekli Aletler

5

Bu planla yapılan

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...