İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Wooden Skates: Twin Hardwood Runners Under a Strapped Board (Boy Mechanic, 1915)
Woody

Oluşturan

Woody

13. Kasım 2026NO
8
0
0
0
0

Wooden Skates: Twin Hardwood Runners Under a Strapped Board (Boy Mechanic, 1915)

F. E. Kennar's wooden skates from The Boy Mechanic, Book 2 (1915), made "to take the place of the usual steel-runner kind" and to prevent sprained ankles: two hardwood runners nailed under a 4 in board, held apart by blocks and bolts, with corner pieces to locate the shoe and straps to hold it. Make two alike.
Başlangıç
About 3 hours

Talimatlar

1

His sizes in centimetres

Jupyter defteri yükleniyor…
2

Read The Boy Mechanic, Book 2

"Skates that will take the place of the usual steel-runner kind and which will prevent spraining of the ankles, can be made of a few pieces of 1/2-in. hardwood boards."
3

Cut the runners

From 1/2 in hardwood, cut four runners 2 in wide at the back and 1-1/2 in wide at the front, each 2 in longer than the shoe. Shape the front ends as in his figure.

Bu adım için malzemeler:

Sert Ağaç TahtasıSert Ağaç Tahtası1 adet

Gerekli aletler:

El TesteresiEl Testeresi
Kıl TestereKıl Testere
El rendesiEl rendesi
Kurşun kalemKurşun kalem
Şerit MetreŞerit Metre
4

Assemble each skate

Nail the top edges of a pair of runners to the underside of a board 4 in wide, at its edges. Fasten a block 2 in wide between the runners at the rear and one 1 in wide in front. Bore the runners and put two bolts through, one just behind the front block and one in front of the rear block.

Bu adım için malzemeler:

Sert Ağaç TahtasıSert Ağaç Tahtası1 adet
ÇivilerÇiviler1 adet
Kare boyunlu yuvarlak başlı cıvataKare boyunlu yuvarlak başlı cıvata2 adet

Gerekli aletler:

El TesteresiEl Testeresi
ÇekiçÇekiç
El matkabıEl matkabı
5

Fit the corner pieces and straps

Fasten four triangular pieces on top, one at each corner, so the heel and toe of the shoe fit between them; if you like, nail a crosspiece in front of the heel. Attach straps to the sides to fasten the skate to the shoe. Make the second skate the same.

Bu adım için malzemeler:

Sert Ağaç TahtasıSert Ağaç Tahtası1 adet
ÇivilerÇiviler1 adet
Deri KayışDeri Kayış2 adet

Gerekli aletler:

El TesteresiEl Testeresi
ÇekiçÇekiç
El matkabıEl matkabı
6

Troubleshooting

Wooden skate troubleshooting.

Flow

Loading...
7

History and honest limits

From "Skates Made of Wood" by F. E. Kennar, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 30). The scan says hardwood boards; the Gutenberg text drops "hardwood". He gives no sizes for the bolts, straps or corner pieces. The tools and metric figures are ours.

Malzemeler

4

Gerekli Aletler

7

Bu planla yapılan

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...