İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Chippewa Canoe Pitch: Spruce Gum Boiled Clean in a Mesh Bag, Skimmed and Mixed with Cedar Charcoal (Densmore, 1928)
The Chippewa (Ojibwe) calking for birch-bark canoes and pails, from Frances Densmore's record: spruce gum boiled in a wide-meshed bag so the bits of wood and bark stay behind, the clean gum skimmed off the water, stored, and later mixed with charcoal made from cedar.
Başlangıç
An hour or two
Talimatlar
1
1
Read Densmore
Read Densmore
"Spruce gum was considered best for use in calking canoes and birch-bark pails."
2
2
Boil the gum clean
Boil the gum clean
Put raw spruce gum in a wide-meshed bag and boil it in water. The bag keeps back the bits of wood and bark; the gum passes out into the water.
Bu adım için malzemeler:
Çam ya da ladin reçinesi1 adet
Su1 adetGerekli aletler:
Naylon file torba
Döküm Çaydanlık
Ateş çukuru3
3
Skim and store
Skim and store
Skim the gum off the surface and store it until it is needed.
Gerekli aletler:
Kevgir kaşık4
4
Mix with cedar charcoal
Mix with cedar charcoal
Crush charcoal made from cedar and mix it into the gum. She gives no proportion; ours: warm the gum until soft, stir in the charcoal a little at a time until it is stiff, test a drop on cold bark, and apply it warm to the seams.
Bu adım için malzemeler:
Odun Kömürü1 adetGerekli aletler:
Taş Havan ve Havaneli
Döküm Çaydanlık
Ateş çukuru
Ahşap kürek5
5
Troubleshooting
Troubleshooting
Canoe pitch troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
From Frances Densmore, *Uses of Plants by the Chippewa Indians*, **44th Annual Report of the Bureau of American Ethnology** (1928), p. 379 (checked on the archive.org scan usesofplantsbych00dens). Small birch-bark containers were sometimes calked instead with chewed slippery elm bark. Amounts, the charcoal ratio, warming and the test are ours.
Malzemeler
3- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
Gerekli Aletler
6- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.


