İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Claw Crowbar: a Round Iron Bar with Steeled Chisel Ends, One Split Hot and Bent into a Claw (Edwinson, 1886)
The builder's and fencer's crowbar from George Edwinson's smithing series (Amateur Work, 1886): a round iron bar 2 to 5 ft long with steel-pointed ends, one forged to a chisel, the other split hot into a fork and bent over into a nail-drawing claw, tempered purple.
Orta
Half a day at the forge
Talimatlar
1
1
His sizes
His sizes
Jupyter defteri yükleniyor…
2
2
Read Edwinson
Read Edwinson
"It is an ordinary round bar of iron with steel-pointed ends."
3
3
Choose the bar
Choose the bar
Take round bar iron of 1, 1 1/4 or 1 1/2 in (25, 32 or 38 mm), 2 to 5 ft (0.6-1.5 m) long. A bar of best tool steel may be lighter.
Bu adım için malzemeler:
Dövme demir çubuk1 adetGerekli aletler:
Sıcak keski4
4
Steel the ends (ours, after his pick method)
Steel the ends (ours, after his pick method)
Split each end hot, weld a steel wedge into the cleft under borax and draw it out, as for a pick point.
Bu adım için malzemeler:
Pota çeliği1 adet
Boraks tozu1 adetGerekli aletler:
Demirci ocağı
Sıcak keski
Örs
Balyoz
Demirci kerpeteni5
5
Forge the chisel end
Forge the chisel end
Forge one end to a chisel shape. Keep the steel no hotter than red and hammer it lightly at that heat.
Gerekli aletler:
Demirci ocağı
Örs
Çekiç
Demirci kerpeteni6
6
Forge the claw
Forge the claw
Forge the other end to a chisel shape too, split it hot into a fork with the hot chisel, and bend the fork over to form the claw. For a quarryman's bar leave out the claw and bend one chisel end over as a short lever.
Gerekli aletler:
Demirci ocağı
Sıcak keski
Örs
Çekiç
Demirci kerpeteni7
7
Harden and temper
Harden and temper
Harden the steeled ends and temper them to a purple, the best tint for crowbars.
Gerekli aletler:
Demirci ocağı
Su verme kovası8
8
Troubleshooting
Troubleshooting
Crowbar troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and fig. 220. The steel wedges follow his pick method; the metric figures and tools are ours.
Malzemeler
3- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.


