İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Steeled Picks: Common Pick, Pickaxe and Miner's Pick, Iron Eye with Steel Points Welded In (Edwinson, 1886)
Forge

Oluşturan

Forge

14. Kasım 2026NO
8
0
0
0
0

Steeled Picks: Common Pick, Pickaxe and Miner's Pick, Iron Eye with Steel Points Welded In (Edwinson, 1886)

How a village smith made picks in the 1880s, from George Edwinson's smithing series in Amateur Work: an iron head welded round its eye, the ends split hot and steel wedges welded in, then hardened and tempered. Variants: the common pick, the pickaxe with a steel-laid axe blade, and the miner's pick with a steel-faced hammer end.
İleri
A day at the forge

Talimatlar

1

Read Edwinson

"The eye or hole for the shaft is formed by first shaping the two sides ... and then welding the two parts together."
2

Form the eye

Forge the two halves of the head with a hollow for the eye in each (his fig. 216), lay them together and weld them into one head round the eye (fig. 217).

Bu adım için malzemeler:

Dövme demir çubukDövme demir çubuk1 adet

Gerekli aletler:

Demirci ocağıDemirci ocağı
ÖrsÖrs
ÇekiçÇekiç
Demirci kerpeteniDemirci kerpeteni
Delik genişletme zımbasıDelik genişletme zımbası
3

Draw the ends

Forge the two ends down to the size you need: a pointed bill and a chisel bill for the common pick, an axe and a point for the pickaxe, a point and a hammer for the miner's pick. For the miner's pick leave the eye massive and oval, tapering from both sides as in a hammer.

Gerekli aletler:

Demirci ocağıDemirci ocağı
ÖrsÖrs
ÇekiçÇekiç
BalyozBalyoz
4

Steel the points

Split each bill end with a hot chisel (his hot sett, fig. 218), insert a wedge of steel in the cleft and weld it in under borax, then draw it out to shape. Do not heat cast steel above a cherry red.

Bu adım için malzemeler:

Pota çeliğiPota çeliği1 adet
Boraks tozuBoraks tozu1 adet

Gerekli aletler:

Demirci ocağıDemirci ocağı
Sıcak keskiSıcak keski
BalyozBalyoz
ÖrsÖrs
Demirci kerpeteniDemirci kerpeteni
5

Steel the axe or hammer end

Pickaxe: enclose a slice of shear steel between the folding leaves of iron at the axe end and forge them down together to form the axe. Miner's pick: face the hammer end with steel.

Bu adım için malzemeler:

Katlamalı (shear) çelik plakaKatlamalı (shear) çelik plaka1 adet
Boraks tozuBoraks tozu1 adet

Gerekli aletler:

Demirci ocağıDemirci ocağı
ÖrsÖrs
ÇekiçÇekiç
Demirci kerpeteniDemirci kerpeteni
6

Harden and temper

Harden the points and temper them to a brown tint tending to straw at the very point. Temper the pickaxe blade purple where steel meets iron, running to straw at the edge.

Gerekli aletler:

Demirci ocağıDemirci ocağı
Su verme kovasıSu verme kovası
7

Handle it (ours)

He does not cover the handle. Ours: shape an ash handle to the eye, drive it in and wedge it.

Bu adım için malzemeler:

Dişbudak kütüğüDişbudak kütüğü1 adet
Ahşap kamalarAhşap kamalar1 adet

Gerekli aletler:

İki Saplı Yontma Bıçağıİki Saplı Yontma Bıçağı
ÇekiçÇekiç
8

Troubleshooting

Pick troubleshooting.

Flow

Loading...
9

History and honest limits

From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond). He gives no dimensions or weights; the sizes, the handle and the tools listed are ours.

Malzemeler

6

Gerekli Aletler

9

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...