İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Gasholder: Water-Sealed Zinc Gasometer with Balance Weights (Ramsay & Travers, 1898)
The laboratory gasometer Ramsay and Travers used to store argon: a zinc bell that rises and falls in a narrow ring of water between two fixed zinc cylinders. Because the water space is only about 2 cm wide, little gas dissolves in it. Weights on cords over pulleys balance the bell, and weights laid on top push the gas out.
Result: a water-sealed gasholder of 18 to 180 litres.
Source: M. W. Travers, The Experimental Study of Gases (1901), pp. 30 and 105-106. Unknown: sizes and how the zinc is joined. Picture: Fig. 34, the small mercury form of the same design.
Orta
Unknown
Talimatlar
1
1
Make the fixed cylinders
Make the fixed cylinders
Make two concentric zinc cylinders on a closed base, leaving a ring-shaped space about 2 cm wide between them for the water. Make the top of the inner cylinder dome-shaped. Bring a gas pipe with a stopcock up through the inner cylinder. Ours: zinc soldered with tin-lead solder. Not given: sizes, how the zinc is joined, the stopcock.
Bu adım için malzemeler:
Çinko levha1 outer and inner cylinders, base
Kalay-kurşun lehim1 seams
Bilinmeyen vana1 gas stopcockGerekli aletler:
Sac makası
Havya
Bilinmeyen şekillendirme yöntemi
Bilinmeyen ölçüler2
2
Make and hang the bell
Make and hang the bell
Make the gasholder bell of zinc to fit closely over the inner cylinder and down into the water ring, with a dome-shaped top matching the inner cylinder's, so all the gas can be pushed out. Ramsay and Travers made bells of about 180, 27, 18 and 18 litres. Tie a cord to the top of the bell and pass it over pulleys to a hanging weight, to take the bell's own weight off the gas. Fill the ring with water. To deliver gas, take weight off the cord or lay weights on top of the bell. Not given: the weights.
Bu adım için malzemeler:
Çinko levha1 bell
Kalay-kurşun lehim1 seams
Kenevir İpi1 balance cords
Makara2 pulleys
Bilinmeyen metal1 balance weightsGerekli aletler:
Sac makası
HavyaMalzemeler
6- 1 bellYer Tutucu
- 2 seamsYer Tutucu
- 1 gas stopcockYer Tutucu
- 1 balance cordsYer Tutucu
- 2 pulleysYer Tutucu
- 1 balance weightsYer Tutucu
Bağlı Plan Malzemeleri
Bu planla yapılan
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.



