İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Saddler's Stitching Clam From Two Oak Barrel Staves on a Dovetailed Deal Base (Hasluck, Harness Making, 1904)
Woody

Oluşturan

Woody

14. Kasım 2026NO
6
0
0
0
0

Saddler's Stitching Clam From Two Oak Barrel Staves on a Dovetailed Deal Base (Hasluck, Harness Making, 1904)

The home-made saddler's clamp from P. N. Hasluck's Harness Making (1904): two curved oak barrel staves, 2 ft long, screwed into a dovetail tenon on a 20 in deal block so their thinned upper ends spring tightly together as jaws. Held slanting between the knees, it grips the work while both hands stitch.
Orta
About half a day

Talimatlar

1

Parts in centimetres

Jupyter defteri yükleniyor…
2

Read Harness Making

"A clamp can be made easily by the worker at home."
3

Shape the staves

Cut two oak cask or barrel staves 2 ft long and at least 3 in wide, the most curved part in the centre (the more bent, the more useful). Clean the outside with a spokeshave, leaving one end the full thickness (about 1 in) and thinning gradually to about 3/4 in toward the upper ends, which form the jaws (Fig. 55). Round the outer corners, flatten the inside, and glass-paper both sides.

Bu adım için malzemeler:

Fıçı tahtasıFıçı tahtası2 adet

Gerekli aletler:

El TesteresiEl Testeresi
Çift saplı rendeÇift saplı rende
Zımpara KağıdıZımpara Kağıdı
4

Cut the base

Cut the lower part C from sound white deal, 20 by 3 by 3 in, with a dovetail-shaped tenon at least 6 in long. Fit the shoulders and the width of its upper end to the curve of your staves so that it takes energetic screwing to bring the staves home and their jaws press tightly together.

Bu adım için malzemeler:

Çam tahtaÇam tahta1 adet

Gerekli aletler:

El TesteresiEl Testeresi
Marangoz keskileriMarangoz keskileri
Ahşap TokmakAhşap Tokmak
El rendesiEl rendesi
5

Screw together

Screw the staves to the tenon with eight stout 2-1/4 in screws, countersunk flush (Fig. 54).

Bu adım için malzemeler:

Ahşap vidalarAhşap vidalar8 adet

Gerekli aletler:

Kol matkabı ve ucuKol matkabı ve ucu
Havşa Ucu SetiHavşa Ucu Seti
Düz tornavidaDüz tornavida
6

Use it

Hold the clamp slanting between the knees, resting against the left knee, with the right leg thrown over it, so the work is held fast between the jaws and both hands are free for the awl and two needles.
7

Troubleshooting

Clamp troubleshooting.

Flow

Loading...
8

History and honest limits

From Paul N. Hasluck, **Harness Making** (1904), "Harness-makers' Tools" (checked on the archive.org scan harnessmaking00hasl, pp. 24-27). The tools and metric figures are ours.

Malzemeler

3

Gerekli Aletler

9

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...