İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Stirrup Leathers: Middlings Straps Stitched to Stirrup Buckles, Creased on the Flesh Side (Hasluck, Saddlery, 1904)
Stirrup leathers hang the stirrup irons from a riding saddle and let the rider set their length. These are the stirrup leathers from Paul N. Hasluck's Saddlery (1904): a strap of stirrup middlings 1-1/4 in wide and 4 ft to 4 ft 6 in long, stitched to a stirrup leather buckle and creased on the flesh side. A saddle takes a pair.
Başlangıç
About 3 hours
Talimatlar
1
1
His sizes in centimetres
His sizes in centimetres
Jupyter defteri yükleniyor…
2
2
Read Saddlery, ch. V
Read Saddlery, ch. V
"Stirrup leathers (Fig. 15) must be made from stirrup middlings, and with stirrup leather buckles; the width may be 1-1/8 in. to 1-1/2 in., but 1-1/4 in. is most common, whilst the length varies from 4 ft. to 4 ft. 6 in."
3
3
Cut the straps
Cut the straps
Cut two straps from stirrup middlings, 1-1/4 in wide (1-1/8 in to 1-1/2 in) and 4 ft to 4 ft 6 in long, to suit the rider. There is no need to cut holes for the buckle tongues at the buckle end, as the tongues do not go through the leather there.
Bu adım için malzemeler:
Üzengi kayışı için orta deri1 adetGerekli aletler:
Deri bıçağı
Şerit Metre4
4
Stitch on the buckles
Stitch on the buckles
Bend the strong end of each strap over for about 2 in and stitch it firmly to the bottom of the buckle. Narrow the buckling end a little and nip a little from each corner.
Bu adım için malzemeler:
Üzengi kayışı tokası2 adet
Keten iplik1 adet
Balmumu1 adetGerekli aletler:
Deri bıçağı
Biz
İki saraç iğnesi
Saraç mengenesi5
5
Finish the edges and crease
Finish the edges and crease
Stain the edges and polish them well. Crease double and heavily with a hot screw crease on the flesh side, instead of the grain side as with other straps.
Bu adım için malzemeler:
Deri boyası1 adetGerekli aletler:
Kenar pahlama aleti
Deri kenar perdahlayıcı
Kıvırma aleti
Propan Pürmüz6
6
Turn the chape and punch
Turn the chape and punch
Turn the chape at the buckle the reverse way, and make about eight holes in each strap.
Gerekli aletler:
Deri delme zımbası
Şerit Metre7
7
Troubleshooting
Troubleshooting
Stirrup leather troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter V, stirrup leathers, pp. 48-49, Fig. 15 on p. 47; every fraction was read on the scan. He says about eight holes; his Fig. 15 shows seven. The ladies' single stirrup strap is not made here. Making them as a pair, the thread, tools and metric figures are ours.
Malzemeler
5- Yer Tutucu
- 2 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
Gerekli Aletler
10- Yer Tutucu
- 1 vendor sell this, none ship to you yetYer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.


