SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Ice-Drawer Butter Worker: An Ice Box Under the Tray, a Worker With Acute Edges
Smith kept the butter cold while it was worked, with ice in a drawer under the tray.
Lettie A. Smith of Pineville, Bucks County, Pennsylvania, received US 9,959, dated 23 August 1853, for the "Labor-Saving Butter-Worker": a tray hinged at its back on a frame, its front resting on a sliding carriage of two notched posts so it can stand flat or inclined; a cooling drawer under it "into which ice is placed for keeping the butter in a cool and nice state while being worked"; a working lever with one end playing in a circular opening in the frame, "formed with acute angles at the sides of its working face" to break or press the butter and turn it over; a spout for the water; and a hook for steelyards to weigh the butter.
This rung works out the tray's slopes, then prints the worker, its socket, the notched posts and spout, builds the frame, and works butter.
Orta
About 4 hours, plus printing
Talimatlar
1
1
The tray's slope
The tray's slope
Jupyter defteri yükleniyor…
2
2
Working butter before it
Working butter before it
The embedded blueprint works the butter inside the churn, drawing it past fixed posts. Smith takes it out to a tray kept cold by an ice drawer, and works it by hand.
3
3
Read US 9,959
Read US 9,959
"The butter after being taken from the churn is placed in the tray or pan E, and there washed and worked up together in the usual manner by the worker H, until all the impurities are extracted and all the water expressed from the same; the water and all extraneous matter runs down the inclined bottom of the pan and escapes through the spout."
4
4
Print the parts
Print the parts
Print the worker head with its triangular working bar, ball end and handle socket (/uploads/blueprints/ice-drawer-butter-worker-worker.stl), the ball plate with its round opening (/uploads/blueprints/ice-drawer-butter-worker-ball-plate.stl), two notched posts with their projections (/uploads/blueprints/ice-drawer-butter-worker-notched-post.stl) and the spout (/uploads/blueprints/ice-drawer-butter-worker-spout.stl). Print the worker on its flat working face. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Bu adım için malzemeler:
PETG filament1 adetGerekli aletler:
FDM 3B yazıcı5
5
Frame, tray and ice drawer
Frame, tray and ice drawer
Build a pine frame about 320 by 220 mm and 260 mm high, with a cross bar across its front and runners below the top. Use a shallow rectangular food-grade container as the tray; hinge its back end to the frame, drill a 16 mm hole at that low end and seal the spout in it with food-safe silicone. Slide a roasting pan onto the runners under the tray as the ice drawer.
Bu adım için malzemeler:
Çam tahta1 adet
Gıda sınıfı saklama kabı1 adet
Kapı menteşesi1 adet
Silikon Dolgu Macunu1 adet
Fırın tepsisi1 adet
#8 x 1" ahşap vidası1 adetGerekli aletler:
El Testeresi
Kablosuz Matkap
Matkap Ucu Takımı
Panç testere seti
Tornavida takımı6
6
Posts, springs and worker
Posts, springs and worker
Hang the two notched posts on the front cross bar so the tray's front rests on their projections, and screw a strip of spring steel to the frame against each post to keep it in its notch. Screw the ball plate to the back of the frame above the tray's hinge, snap the worker's ball into it, and glue a 20 mm dowel into its socket as the handle, long enough to reach over the tray's front.
Bu adım için malzemeler:
Yay çeliği şeridi1 adet
Sert ağaç kavelalar1 adet
Ahşap Tutkalı1 adet#8 x 1" ahşap vidası1 adetGerekli aletler:
Demir TesteresiTornavida takımı
Zımpara Kağıdı7
7
The patent drawing
The patent drawing
US 9,959 drawing sheet, public domain (expired patent).
8
8
Churn, then work the butter cold
Churn, then work the butter cold
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Churn 1 litre in any churn until the butter comes, and drain it. Fill the drawer with ice. Set the tray flat, put in the butter and cold water and press and turn it with the worker's edges; raise the tray's front a notch or two so the water runs out of the spout. Repeat with fresh water until it runs clear, work in a pinch of salt and weigh the butter.
Bu adım için malzemeler:
Yağlı krema1000 ml
Buz küpleri1 adet
İri Deniz Tuzu1 adet
Su1 adetGerekli aletler:
Takılı kalan problu termometre
Kronometre
Dijital Mutfak Terazisi
Büyük paslanmaz çelik karıştırma kâsesi9
9
Posts that slip, butter that smears
Posts that slip, butter that smears
Ice-drawer butter worker troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Lettie A. Smith** of Pineville, Bucks County, Pennsylvania, received US 9,959, dated 23 August 1853, for the "Labor-Saving Butter-Worker." The specification calls the tray both E and F, and E is also the cross bar the notches rest on. The claims are the cooling drawer or ice box G combined with the butter tray, and the working lever formed with acute angles at the sides of its working face; Smith did not claim the working lever with a tray in general.
**Honest limits.** A container, a roasting pan, pine and printed parts stand in for the original; we weigh on a kitchen scale, not steelyards. FDM prints hold food in their layer lines, so wash well and replace when worn. Your weights are the result.
Malzemeler
14- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 2 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1000 mlYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
Gerekli Aletler
12- Yer Tutucu
- Yer Tutucu
- 1 vendor sell this, none ship to you yetYer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
Post-and-Float Butter-Working Churn: Floats Revolving Astride Fixed Posts
Woody tarafından
Ağaç işleri
12
0
0
0
0
0
Water-Jacketed Churn: Hot or Cold Water Under a Metal Plate Tempers the Cream
Karen tarafından
YİYECEK & İÇECEK
9
0
0
0
0
0
Churning Butter from Cream — The 5,000-Year-Old Fat Separation
TheChef tarafından
ZANAAT
47
0
0
0
0
0
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.