İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Festooned Kite: Three Tailless Kites on One 7 ft Spruce Spine With Tissue-Paper Fringes (Boy Mechanic, 1919)
Spartan

Oluşturan

Spartan

13. Kasım 2026NO
7
0
0
0
0

Festooned Kite: Three Tailless Kites on One 7 ft Spruce Spine With Tissue-Paper Fringes (Boy Mechanic, 1919)

C. M. Miller's compound kite from The Boy Mechanic, Book 3 (1919): three tailless kites, 3 ft, 2 ft and 1 ft wide, strung on one 7 ft spruce spine, covered in tissue paper and hung with fringed tissue festoons from the ends of the sticks. An 87 in bridle sets it to the wind.
Orta
About 1 day

Talimatlar

1

Spine stations and string lengths

Jupyter defteri yükleniyor…
2

Read The Boy Mechanic, Book 3

"More than one kite on the same framework is known as a compound kite. The one illustrated consists of three tailless kites on one long stick, called the spine."
3

Cut the sticks

Cut the spine of straight-grained spruce (or pine or bass) without a twist, 7 ft long by 1/4 by 1/2 in; if the wood breaks easily make it 3/4 in wide, or 3/8 in thick. Cut the bows 4 ft by 1/4 by 1/2 in, 2 ft by 1/4 by 3/8 in, and 1 ft by 1/4 by 1/4 in. A twisted spine keeps the three kites out of one plane and makes the kite unsteady.

Bu adım için malzemeler:

Yumuşak ağaç çıtaYumuşak ağaç çıta4 adet

Gerekli aletler:

El TesteresiEl Testeresi
El rendesiEl rendesi
Şerit MetreŞerit Metre
Kurşun kalemKurşun kalem
4

Lash on the bows

Lash the upper bow 13 in from the top of the spine, its ends 6 in past the kite for the festoons; then the centre bow 5 in below D and the lower bow as in the drawing (6, 7, 29, 5, 19, 2, 10 and 6 in down the spine). Lash, do not nail: wind diagonally both left and right round the two sticks, then wind between them round the other windings to draw everything tight.

Bu adım için malzemeler:

Uçurtma ipiUçurtma ipi1 adet

Gerekli aletler:

Şerit MetreŞerit Metre
Kurşun kalemKurşun kalem
MakasMakas
5

String the outlines

Drill small holes (or notch with a knife or saw) in the spine 6 in from the top at A, 6 in from each end of the upper bow at B and C, and 29 in below the upper bow at D. Tie the outline at A and pass it through C, D and B back to A; draw it tight without springing spine or bow. Check that AC equals AB and CD equals BD, shift the string until they do, and wind each point (E) so it cannot slip. String the centre and lower kites the same way.

Bu adım için malzemeler:

Uçurtma ipiUçurtma ipi1 adet

Gerekli aletler:

El matkabıEl matkabı
Çelik çakıÇelik çakı
Şerit MetreŞerit Metre
6

Cover and fringe

Cut the tissue about 1 in larger all round than each kite, turn over about half the allowance and paste it, leaving the cover loose. French tissue comes in fine colours and is stronger than common tissue; Chinese rice paper is strongest but only natural colour. For the festoons cut tissue strips 2-1/2 in wide, paste 1/2 in of one long edge over a string, and slit the loose edge every 1 in. Hang the festoons from the stick ends in easy curves, not tight, keeping both sides balanced.

Bu adım için malzemeler:

Renkli pelür kâğıdıRenkli pelür kâğıdı5 yaprak
Buğday tutkalıBuğday tutkalı1 adet
Uçurtma ipiUçurtma ipi1 adet

Gerekli aletler:

MakasMakas
Tutkal fırçasıTutkal fırçası
CetvelCetvel
7

Bow the kites and bridle

Tie a string from end to end of the upper and centre bows on the back and spring in short brace sticks to bend them, as usual for tailless kites. Tie the 87 in bridle at A and to the spine at F, and attach the kite line 30 in from A, leaving 57 in to F.

Bu adım için malzemeler:

Uçurtma ipiUçurtma ipi1 adet
Yumuşak ağaç çıtaYumuşak ağaç çıta1 adet

Gerekli aletler:

Çelik çakıÇelik çakı
Şerit MetreŞerit Metre
8

Flying and troubleshooting

Festooned kite flying.

Flow

Loading...
9

History and honest limits

From "How to Make Combined Kites, Part II: A Festooned Kite" by C. M. Miller, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, pp. 155-156). He does not name the string, the paste or the kite line. The tools and metric figures are ours.

Malzemeler

4

Gerekli Aletler

9

Bu planla yapılan

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...