SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Building Leonardo da Vinci's Parachute — The Sealed Linen Pyramid of 1485
In a notebook around 1485 Leonardo da Vinci sketched a pyramid of sealed linen and wrote: 'If a man have a tent made of linen of which the apertures have all been stopped up, and it be twelve braccia across and twelve in depth, he will be able to throw himself down from any great height without suffering any injury.' For 500 years people assumed it could never work. In 2000 the skydiver Adrian Nicholas built it to Leonardo's exact dimensions and descended smoothly beneath it — proving the Renaissance master right. This blueprint reconstructs that rigid-frame linen pyramid: cut and sew the canopy, seal it airtight, lash the frame, and rig the harness.
İleri
16
Talimatlar
1
1
Understand Leonardo's design
Understand Leonardo's design
Leonardo's parachute is a four-sided pyramid of sealed linen, twelve braccia (about 7 metres) square at the base and twelve braccia tall. Unlike a modern soft parachute it is held open by a rigid frame. The sealed cloth traps a large volume of air, and the drag of that trapped air slows the fall.
2
2
Cut the four canopy panels
Cut the four canopy panels
Cut four tall isosceles triangles of strong linen — one for each sloping face of the pyramid. Each triangle has a base of about 7 metres and rises to the apex. Add a generous seam allowance along every edge for stitching.
Bu adım için malzemeler:
Linen Fabric60 square meterGerekli aletler:
Sharp Scissors3
3
Sew the panels into a pyramid
Sew the panels into a pyramid
Stitch the four triangles together edge to edge to form the pyramid canopy. Punch the stitch holes with the awl and sew with strong waxed cord in a double row so the seams can carry the load of trapped air.
Bu adım için malzemeler:
Binding Rope20 metreGerekli aletler:
Awl4
4
Seal the linen airtight
Seal the linen airtight
Rub warmed beeswax and boiled linseed oil into the whole canopy so the weave is filled and 'the apertures are all stopped up', as Leonardo insisted. A sealed canopy traps the air instead of letting it leak through — this is what makes it work.
Bu adım için malzemeler:
Beeswax Pellets500 gram
Boiled Linseed Oil1 litre5
5
Lash the square base frame
Lash the square base frame
Cut four straight, light poles and lash them into a rigid square frame the full width of the canopy base. This frame holds the mouth of the pyramid open against the rush of air.
Bu adım için malzemeler:
Green Wood Poles (1-2m)4 adetBinding Rope10 metreGerekli aletler:
Hand Saw6
6
Raise the apex struts
Raise the apex struts
Run light poles from each corner of the base frame up to a single apex point and lash them there, forming the pyramid's skeleton so the canopy keeps its shape and cannot collapse inward.
Bu adım için malzemeler:
Green Wood Poles (1-2m)4 adetBinding Rope10 metreGerekli aletler:
Knife7
7
Mount the canopy on the frame
Mount the canopy on the frame
Lash the sealed canopy to the base frame and up the apex struts so it stands as a taut, rigid pyramid with no slack cloth to flap or spill air.
Bu adım için malzemeler:
Binding Rope10 metreGerekli aletler:
Awl8
8
Rig the harness lines
Rig the harness lines
Tie four strong suspension lines from the corners of the base frame down to a central harness, all the same length so the load hangs level and the trapped air stays balanced above the jumper.
Bu adım için malzemeler:
Binding Rope20 metreGerekli aletler:
Knife9
9
Understand why it works
Understand why it works
The 7-metre sealed canopy presents a huge area to the air. The drag on that area is enough to hold a person's fall to a safe, steady speed. The rigid frame keeps the pyramid fully open the whole way down — the reason Leonardo's shape descends stably where a limp sheet would not.
10
10
Test responsibly
Test responsibly
Treat this as an engineering reconstruction, not a stunt. Inspect every seam and lashing under load, and demonstrate it as a scale model or a static drop test only. The historic full descent was made by a trained skydiver carrying a modern reserve parachute — never jump a home-built parachute.
Malzemeler
5- 60 square meterYer Tutucu
- 70 metreYer Tutucu
- 500 gramYer Tutucu
- 1 litreYer Tutucu
- 8 adetYer Tutucu
Bağlı Plan Malzemeleri
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.