İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Cigar-Box Hawaiian Ukulele: Spanish-Cedar Body, 11 in Neck and Frets by the Rule of Eighteen (Boy Mechanic, 1919)
Woody

Oluşturan

Woody

14. Kasım 2026NO
9
0
0
0
0

Cigar-Box Hawaiian Ukulele: Spanish-Cedar Body, 11 in Neck and Frets by the Rule of Eighteen (Boy Mechanic, 1919)

S. H. Samuels's ukulele from The Boy Mechanic, Book 3 (1919), made for 30 cents: a Spanish-cedar cigar box rebuilt as a 9 x 6 in body with a 2-1/2 in sound hole, an 11 in cedar or mahogany neck, a notched hardwood bridge, and aluminium frets set by the old rule of 1/18 on a 13 in string length.
Orta
About 2 days

Talimatlar

1

Fret table

Jupyter defteri yükleniyor…
2

Read The Boy Mechanic, Book 3

"The size of this instrument makes it especially suited to the cigar-box type of body construction."
3

Rebuild the box as the body

Take a good Spanish-cedar cigar box about 2-1/2 by 6 by 9 in, soak off the paper without marring the wood, take it apart and trim edges with too many or broken nail holes. Fit the parts so top and bottom rest against the sides and ends, the ends between the sides (Fig. 2; drawn 9 by 6 by 2-1/4 in). Cut a 2-1/2 in hole in the top 3-3/4 in from the neck end. Make corner strips A 1/4 in square and strips B 1/4 by 5/8 by 4-1/2 in for under the top and on the bottom.

Bu adım için malzemeler:

Sedir tahtasıSedir tahtası1 adet

Gerekli aletler:

Kıl TestereKıl Testere
Deri bıçağıDeri bıçağı
El rendesiEl rendesi
PusulaPusula
CetvelCetvel
4

Make the neck, nut and bridge

Cut the neck from Spanish cedar or mahogany, 11 in long, best in one piece (or with the peg extension and the wide body end glued on and doweled): head 4-1/2 in, fingerboard 6-5/8 in from the 1/8 in nut, 1-1/4 in wide at the nut and 1-3/4 in at the body, heel 7/16 in, section 7/8 by 2-1/4 in as drawn (Fig. 3). Make the nut D of mahogany or walnut with the grain lengthwise, notched for the strings as spaced. Make the bridge C of hard wood, 2-1/2 in long and 1/2 in high, hollowed under the notched edge, with a metal string contact.

Bu adım için malzemeler:

Sert Ağaç TahtasıSert Ağaç Tahtası1 adet
Ahşap Kavela ÇubuğuAhşap Kavela Çubuğu1 adet
Hayvansal tutkalHayvansal tutkal1 adet
Pirinç şeritPirinç şerit1 adet

Gerekli aletler:

El TesteresiEl Testeresi
Kıl TestereKıl Testere
Deri bıçağıDeri bıçağı
Eğeler (El Eğesi)Eğeler (El Eğesi)
El matkabıEl matkabı
5

Fret the fingerboard

Measure the string length from the bridge contact to the nut (13 in here). Set the first fret 1/18 of that distance from the nut, the second 1/18 of the distance from the first fret to the bridge, and so on (notebook). Cut grooves 1/8 in deep and drive in frets of aluminium (or brass) 1/16 by 3/16 in, tight enough to need no fastening.

Bu adım için malzemeler:

Pirinç şeritPirinç şerit1 adet

Gerekli aletler:

El TesteresiEl Testeresi
Demir TesteresiDemir Testeresi
Eğeler (El Eğesi)Eğeler (El Eğesi)
CetvelCetvel
Kurşun kalemKurşun kalem
ÇekiçÇekiç
6

Assemble and finish

Glue the body's end to the neck with animal glue, reinforced by screws, its upper edge parallel with the fingerboard and the fingerboard flush with the top. Glue the body (without the top) to that end; when dry, glue in the strips, bridge and finally the top. Clean, sandpaper, stain and shellac or varnish. Fit tuning pegs (bought or made) and a set of strings.

Bu adım için malzemeler:

Hayvansal tutkalHayvansal tutkal1 adet
Ahşap vidalarAhşap vidalar1 adet
Zımpara KağıdıZımpara Kağıdı1 adet
Gomalak vernikGomalak vernik1 adet
Akort BurgularıAkort Burguları4 adet
Ukulele teliUkulele teli1 adet

Gerekli aletler:

Çubuklu işkenceÇubuklu işkence
Düz tornavidaDüz tornavida
Geniş boya fırçasıGeniş boya fırçası
7

Troubleshooting

Ukulele troubleshooting.

Flow

Loading...
8

History and honest limits

From "A Homemade Hawaiian Ukulele" by S. H. Samuels, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, pp. 358-359). He gives the box as about 2-1/2 in deep; his drawing shows 2-1/4 in. He names no stain and no string type. The fret table, its equal-temperament comparison and the metric figures are ours.

Malzemeler

10

Gerekli Aletler

14

İlgili Blueprint'ler

Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...