SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Steel Needle: Pointed, Eyed, Hardened in Oil and Tempered
Needles are made from good steel wire: cut, straightened, pointed, flattened and pierced for the eye, hardened by heating and plunging into oil, then tempered back to a springy hardness, scoured and polished (Bucknall Smith, A Treatise upon Wire, 1891). This is the same sequence by hand, one heavy needle at a time from piano wire; the hand methods and sizes are ours.
The picture: steel sewing needles (Wikimedia Commons).
Orta
Half a day
Talimatlar
1
1
Cut, soften and straighten
Cut, soften and straighten
Cut 70 mm of 1.2 mm piano wire. Heat it to red in the forge and let it cool slowly in the ashes so it can be filed and drilled, then roll it straight on the anvil.
Bu adım için malzemeler:
Piyano teli70 mmGerekli aletler:
Yan keski
Demirci ocağı
Kargaburun pense
Örs2
2
Point
Point
Clamp it in the vise and file a long, even taper to a sharp point, turning the wire as you go.
Gerekli aletler:
Eğe Takımı
Tezgah Mengenesi
Koruyucu gözlük3
3
Flatten and pierce the eye
Flatten and pierce the eye
Flatten the head end slightly on the anvil, drill the eye through the flat with the finest bit, then file off the burrs and round the head.
Gerekli aletler:
Örs
Enine keski başlı çekiç
El matkabı
Eğe Takımı
Tezgah Mengenesi
Koruyucu gözlük4
4
Harden in oil
Harden in oil
Heat the needle evenly to red and plunge it into the oil. It is now glass-hard and brittle.
Gerekli aletler:
Demirci ocağı
Kargaburun pense
Yağlı su verme teknesi
Koruyucu gözlük5
5
Temper
Temper
Reheat it in the oven to about 600 °F (315 °C) and let it cool slowly to a springy temper. If it came out crooked, straighten it with light blows of a small hammer on the anvil.
Gerekli aletler:
Isıl işlem fırını
Göstergeli ısıl çift
Örs
Enine keski başlı çekiç6
6
Scour and polish
Scour and polish
Scour it bright with emery cloth, a little oil and soap. Wash it in hot water, dry it in sawdust, touch up the point, and polish it on the leather strop.
Gerekli aletler:
Zımpara bezi
Zeytinyağı
Sabun
Talaş
Deri bileme kayışı
Eğe TakımıMalzemeler
1- 70 mmYer Tutucu
Gerekli Aletler
17- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.


