SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Stepped Spiral Egg Beater: A Stepped Dasher Spun in a Square Box
A beater spun in a round bowl soon drags the whole mixture round with it.
Thomas McBean of Fowlerville, New York, received US 24,134, dated 24 May 1859, for an egg beater: "a double spiral-shaped beater or dasher with its surface formed into steps within a square box," turned horizontally on a vertical shaft by a bevel pinion and a handle, so that the dasher and the square box together "so thoroughly breaks up all portions of the eggs that they may be well and very thoroughly beaten in a few seconds."
This rung compares the side and corner gaps, then prints the stepped dasher, builds a square box with a bevel drive, and times beating in the box against a round bowl.
Orta
About 4 hours, plus printing
Talimatlar
1
1
Tip speed and the corners
Tip speed and the corners
Jupyter defteri yükleniyor…
2
2
A geared beater a month before it
A geared beater a month before it
The embedded blueprint beats with two wire whisks turning opposite ways. McBean turns one stepped dasher and lets the box's corners do the breaking up.
3
3
Read US 24,134
Read US 24,134
"The nature of my invention consists in arranging a double spiral-shaped beater or dasher with its surface formed into steps within a square box and in communicating to this dasher a swift rotary motion so as to revolve it horizontally within said box."
4
4
Print the dasher
Print the dasher
Print the stepped double-spiral dasher (/uploads/blueprints/stepped-spiral-egg-beater-dasher.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.
Bu adım için malzemeler:
PETG filament1 adetGerekli aletler:
FDM 3B yazıcı5
5
Build the box
Build the box
Cut a plywood base and four sides to make a box 104 mm square inside and 90 mm deep. Glue and screw it, and seal the inside seams with silicone.
Bu adım için malzemeler:
Kontrplak levha1 adet
#8 x 1" ahşap vidası1 adet
Silikon Dolgu Macunu1 adetGerekli aletler:
Kıl Testere
Kablosuz Matkap
Matkap Ucu Takımı
Tornavida takımı
Cetvel6
6
Fit the shaft and gears
Fit the shaft and gears
Screw a hardwood bar across the box's top with a bracket above it. Run a 5 mm rod down through the bar to a socket in the floor, with the dasher at its foot and one bevel gear at its top; mount the other gear on a crank shaft through the bracket so they mesh.
Bu adım için malzemeler:
Sert Ahşap Blok1 adet
Yumuşak Çelik Çubuk1 adet
Konik dişli takımı (çelik, 1:1)1 adet
İki bileşenli epoksi1 adet
Düz Pul1 adetGerekli aletler:
Demir TesteresiKablosuz MatkapMatkap Ucu Takımı
Tezgah Mengenesi7
7
The patent drawing
The patent drawing
US 24,134 drawing sheet, public domain (expired patent).
8
8
Square box against round bowl
Square box against round bowl
Beat two egg whites in the box at about two crank turns a second and time them to stiff peaks. Repeat with the dasher in a round bowl of the same size.
Bu adım için malzemeler:
Yumurta4 adetGerekli aletler:
Büyük paslanmaz çelik karıştırma kâsesi
Kronometre9
9
A dasher that swirls, scrapes or slips
A dasher that swirls, scrapes or slips
Stepped spiral egg beater troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Thomas McBean** of Fowlerville, Livingston County, New York, received US 24,134, dated 24 May 1859. The dasher's spiral circular plates are soldered to a small tube and bent into steps radial from the axis; the shaft passes up through the box's cover to a bracket, its lower end resting on a pin in the box's bottom. He claimed the double spiral dasher in combination with the square box.
**Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. A printed dasher and a bought 1:1 bevel pair stand in for his tin plates and pinions. Your times are the result.
Malzemeler
10- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- Yer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 4 adetYer Tutucu
Gerekli Aletler
10- Yer Tutucu
- Yer Tutucu
- 1 vendor sell this, none ship to you yetYer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.