SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Strontium-Calcium Ferrite Disc Magnet: Equal Strontium and Calcium, 1280 °C (Went, Philips 1956, Ex. 27)
A ferrite with half the strontium replaced by calcium: 0.3 mol strontium carbonate and 0.3 mol calcium carbonate to 3.1 mol iron oxide, milled 15 hours, pressed and passed through a 1280 °C furnace in 10 minutes. Went's rod held 1,645 gauss with a coercive force of 2,460 oersted.
Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 27. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
İleri
2 days
Talimatlar
1
1
Weigh the carbonates and iron oxide
Weigh the carbonates and iron oxide
Weigh 44.3 g strontium carbonate (0.3 mol), 30.2 g calcium carbonate (0.3 mol), 500.0 g ferric oxide (3.1 mol).
Bu adım için malzemeler:
Stronsiyum karbonat44.3 g
Kalsiyum karbonat (tebeşir tozu)30.2 g
Ferrik oksit500 gGerekli aletler:
Eşit kollu terazi
P100 Solunum Maskesi2
2
Mill with alcohol 15 hours, dry
Mill with alcohol 15 hours, dry
Grind the mixture with alcohol in a ball mill for 15 hours, then dry it.
Gerekli aletler:
Demir Bilyalı Değirmen
Etanol - laboratuvar kalitesi, %95
Kurutma fırını3
3
Press at 1.5 t/cm²
Press at 1.5 t/cm²
Press the dry powder at 1.5 tonnes per cm² (ours: discs instead of a rod).
Gerekli aletler:
Hidrolik pres
Disk presleme kalıbı4
4
Pass through a 1280 °C zone in 10 minutes
Pass through a 1280 °C zone in 10 minutes
Sinter at 1280 °C by passing the pieces through a 10 cm hot zone at 10 mm per minute: 10 minutes in the heat.
Gerekli aletler:
Tüp Fırın
Isıya Dayanıklı Eldiven5
5
Magnetise the discs
Magnetise the discs
The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.
Gerekli aletler:
Elektromıknatıs
PusulaMalzemeler
3- 44.3 gYer Tutucu
- Yer Tutucu
- 500 gYer Tutucu
Gerekli Aletler
11- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.


