SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Two-Frame Percussion Dasher Churn: The Upper Frame Strikes the Lower at Every Down Stroke
W. H. Burnham and B. Hibbard of Cortland, New York, received US 15,412, dated 29 July 1856, for a dasher of two slatted frames loosely joined: at each down stroke the lower frame meets the bottom and the upper frame is "driven violently in the contact with the lower frame," forcing the cream up between the bars in thin sheets.
This rung prints the two frames, key and wedge, builds the churn and lever, and makes butter.
Orta
About 4 hours, plus printing
Talimatlar
1
1
The slack between the frames
The slack between the frames
Jupyter defteri yükleniyor…
2
2
Slats that close on the cream before it
Slats that close on the cream before it
Clement folds a slatted box; Burnham and Hibbard strike one frame on another.
3
3
Read US 15,412
Read US 15,412
"Then when the dasher is forced downward, the lower frame of the dasher will be first arrested by the bottom of the box, which will cause the upper frame of the dasher to be driven violently in the contact with the lower frame thereof and by so doing, will cause the cream which is carried down before it, to be driven with percussive force into the spaces between the bars of the lower frame and thence up in thin sheets."
4
4
Print the parts
Print the parts
Print the upper frame (/uploads/blueprints/two-frame-percussion-dasher-churn-upper-frame.stl), the lower frame (/uploads/blueprints/two-frame-percussion-dasher-churn-lower-frame.stl) and the key and wedge (/uploads/blueprints/two-frame-percussion-dasher-churn-key-and-wedge.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Bu adım için malzemeler:
PETG filament1 adetGerekli aletler:
FDM 3B yazıcı5
5
The dasher
The dasher
Glue a 12 mm square hardwood handle into the lower frame and two 6 × 12 mm laths into the upper frame's sockets. Cut a slot 40 mm long down both laths. Set the handle between the laths and push the key through a hole in the handle and through the slots.
Bu adım için malzemeler:
Sert ağaç kavelalar1 adet
Ahşap Tutkalı1 adetGerekli aletler:
El Testeresi
Kablosuz Matkap
Matkap Ucu Takımı6
6
Box and lever
Box and lever
Use a rectangular food-grade container about 210 by 150 mm on a pine platform. Hinge a pine upright at one end of the platform and pin a pine lever to its top; pin the two laths to the lever above the box.
Bu adım için malzemeler:
Gıda sınıfı saklama kabı1 adet
Çam tahta1 adet
Yumuşak Çelik Çubuk1 adet
#8 x 1" ahşap vidası1 adetGerekli aletler:
El TesteresiKablosuz Matkap
Tornavida takımı7
7
The build in 3D
The build in 3D
FreeCAD model of this build: the box cut away to show the two slatted frames, the double handles and key, and the lever on its oscillating upright.
8
8
Churn, then gather
Churn, then gather
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 2 litres. Work the lever steadily; time until the butter comes. Push the wedge into the slots above the handle to hold the frames apart, and work on slowly to gather the butter. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Bu adım için malzemeler:
Yağlı krema2000 ml
İri Deniz Tuzu1 adet
Su1 adetGerekli aletler:
Takılı kalan problu termometre
Kronometre
Dijital Mutfak Terazisi
Büyük paslanmaz çelik karıştırma kâsesi9
9
Troubleshooting
Troubleshooting
Two-frame dasher troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**W. H. Burnham and B. Hibbard** of Cortland village, Cortland County, New York, US 15,412, 29 July 1856, signed 5 June 1856; the drawing reads "Reciprocating Churn." They claimed the dasher of two independent frames combined with each other and the lever. A container, pine and printed parts stand in for theirs. FDM prints hold food in their layer lines, so wash well and replace when worn.
Malzemeler
10- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
- 2000 mlYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
Gerekli Aletler
9- Yer Tutucu
- Yer Tutucu
- 1 vendor sell this, none ship to you yetYer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Tasarım dosyaları
1İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
Folding Slat-Box Dasher Churn: A Slatted Parallelogram That Folds to Squeeze the Cream
Woody tarafından
Ağaç işleri
13
0
0
0
0
0
Channel-Ring Dasher Churn: A Hollow Column of Cream Traps Air at Every Stroke
Buttercup tarafından
YİYECEK & İÇECEK
8
0
0
0
0
0
Churning Butter from Cream — The 5,000-Year-Old Fat Separation
TheChef tarafından
ZANAAT
47
0
0
0
0
0
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.