Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Mine Suction Pump of Bored Logs: Perforated Trunk, Valve Box and Leather-Shoe Piston (Agricola, 1556)
Agricola's first suction pump for draining mine sumps, from De Re Metallica, Book VI (1556): logs bored into pipes stand on a perforated trunk two feet deep in the sump, with a bottomless metal valve box one palm deep; a workman on the flooring works a piston whose leather shoe, or better a perforated iron or wooden disc, lifts the water to a spout into the tunnel drain.
Просунутий
Several days
Інструкції
1
1
Units and lift
Units and lift
Завантаження блокнота Jupyter…
2
2
Read De Re Metallica, Book VI
Read De Re Metallica, Book VI
"Thus the workman, eager at his labour, standing on the flooring boards, pushes the piston down into the pipe and draws it out again."
3
3
Bore the pipes
Bore the pipes
Bore straight logs through their length to make the pipe, first with a borer with an auger and then with a wider borer (Illustration 177, O-Q). Use one length, or two with one joined into the other.
Матеріали для цього кроку:
Колода2 штукНеобхідні інструменти ({count})
Бур
Ручний свердел
Сокира
Скобель4
4
Make the trunk and valve box
Make the trunk and valve box
Make a trunk two feet deep, hollow like the pipe, its lower opening blocked with a round piece of wood and its sides perforated round about so water flows in. Make a box of iron, copper or brass one palm deep, without a bottom, closed by a rounded valve that stops the raised water running back. Set it in the top of the trunk if there is one pipe, or in the lower pipe at the joint if there are two.
Матеріали для цього кроку:
Колода1 штука
Дошка з твердої деревини1 штука
Лист маловуглецевої сталі1 штука
Лимарна шкіра1 штукаНеобхідні інструменти ({count})
Бур
Стамески
Ножівка по металу
Молоток
Горно
Ковадло5
5
Set the pipe
Set the pipe
Lay a flooring over the sump. Let the pipe down through it to the bottom of the sump with the trunk on its lower end, and fix it with pointed iron clamps driven in straight on both sides. Cut an opening or spout in the upper pipe reaching to the drain of the tunnel.
Матеріали для цього кроку:
Соснова дошка4 штук
Смуга з маловуглецевої сталі2 штук
Цвяхи1 штукаНеобхідні інструменти ({count})
Ручна пилка
Молоток
Бур6
6
Make the piston
Make the piston
Fit the piston rod with a hand-bar at the top. At the bottom fix either a shoe, a leather covering stitched almost cone-shaped, tight round the rod and wide open at the top, or (far better) a disc of iron one digit thick or of wood six digits thick, fixed by an iron key through the rod or screwed on, with five or six round or oval openings in a star and a cover over them, the same diameter as the inside of the pipe.
Матеріали для цього кроку:
Дошка з твердої деревини1 штука
Лимарна шкіра1 штука
Лист маловуглецевої сталі1 штука
Смуга з маловуглецевої сталі1 штукаНеобхідні інструменти ({count})
Шило
Дві лимарські голки
Ручний дриль
Напилки (ручний напилок)
Ручна пилка7
7
Pump
Pump
Standing on the flooring, push the piston down and draw it up. On the up-stroke the cover closes the disc openings and the water above is lifted to the spout, while the valve of the box opens and water from the trunk rises by suction; on the down-stroke the valve closes and the water passes up through the disc.
8
8
Troubleshooting
Troubleshooting
Suction pump troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From Georgius Agricola, **De Re Metallica** (1556), Book VI, translated by Herbert C. and Lou H. Hoover, 1912 (Gutenberg 38015; checked on the archive.org scan georgiusagricola00agri, pp. 176-177). He gives no bore, pipe length or lift. The metric equivalents of his Roman units, the suction limit and the tools are ours.
Матеріали
7- 2 штукЗаповнювач
- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
- 2 штукЗаповнювач
- 4 штукЗаповнювач
- Заповнювач
- 1 штукаЗаповнювач
Необхідні інструменти
14- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

