Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Assay Cupels From Washed Beech and Bone Ash, Rammed in a Brass Mould (Agricola, De Re Metallica, 1556)
Peter

Створено

Peter

14. листопад 2026SE
3
0
0
0
0

Assay Cupels From Washed Beech and Bone Ash, Rammed in a Brass Mould (Agricola, De Re Metallica, 1556)

How the assayers of Agricola's day made their own cupels, from De Re Metallica, Book VII (1556): wash wood ash free of floating charcoal and fat and of sinking sand and stones, mix it with bone ash (or use deer-horn, skull or fish-spine ash), moisten with beer or water, grind fine and ram it into a bottomless brass mould with a knobbed pestle; then dry the cupels and keep them long.
Середній
About 2 days, mostly drying

Інструкції

1

His ash recipes

Завантаження блокнота Jupyter…
2

Read De Re Metallica, Book VII

"The cupels are made of ashes ... In these lead is separated from silver, and by them assays are concluded. Inasmuch as the assayers themselves make the cupels, something must be said about the material."
3

Wash the ash

Pour water on the ash, skim off what floats (charcoal dust, fat), knead the ash with the hands into the water, and pour the muddy water into a second vessel, leaving the small stones and sand in the first to be thrown away. When the ash has settled and the water is clear and no longer tastes of lye, pour the water off and dry the ash in the sun or a furnace. Beech or other slow-growing wood gives the best ash; vine ash cracks and absorbs metal. If no such ash is to be had, roll the washed ash into little balls and burn them in a baker's or potter's oven to drive off fat and damp.

Матеріали для цього кроку:

Деревна золаДеревна зола1 штука

Необхідні інструменти ({count})

Дерев'яне відроДерев'яне відро
ГрохотГрохот
4

Mix with bone ash

The older and drier the ash the better. Bone ash, especially from the heads of animals, deer-horn ash and fish-spine ash are the most suitable. Mix by his recipes (notebook): the usual way is beech ash sprinkled with beer or water to make it stick, ground in a small mortar, then ground again with skull or fish-spine ash; the more it is ground the better. Options he gives: sifted brick dust in the beech ash, so the lead does not eat the cupel; moistening with cow's milk again and again; deer horn alone, the best of all.

Матеріали для цього кроку:

Деревна золаДеревна зола1 штука
Кісткова золаКісткова зола1 штука
ПивоПиво1 штука
Ріг благородного оленяРіг благородного оленя1 штука
ЦеглаЦегла1 штука

Необхідні інструменти ({count})

ПіпеткаПіпетка
ГрохотГрохот
5

Mould the cupels

Ram the damp ash into a bottomless brass mould with a brass pestle whose round knob presses the hollow; the part next to the knob fits the top of the mould. Push the cupel out whole. Use the small mould for cupels that purge gold or silver from lead, the large for separating silver from copper and lead (Illustration 231). For ores of copper containing iron, some moisten the made cupels with white of egg, dry them in the sun and crush and mould them again.

Матеріали для цього кроку:

ЯйцеЯйце1 штука

Необхідні інструменти ({count})

Форма для капель (кільце й товкач)Форма для капель (кільце й товкач)
Дерев'яний молоток (киянка)Дерев'яний молоток (киянка)
6

Dry and store

Dry the cupels in the sun or in a furnace, then keep them a long time in a dry place; the older they are, the drier and better.
7

Troubleshooting

Cupel troubleshooting.

Flow

Loading...
8

History and honest limits

From Georgius Agricola, **De Re Metallica** (1556), Book VII, translated by Herbert C. and Lou H. Hoover, 1912 (Project Gutenberg 38015; checked on the archive.org scan georgiusagricola00agri, pp. 229-231). He gives proportions but no sizes or weights for cupels or moulds. The tools are ours.

Матеріали

6

Необхідні інструменти

5

За цим кресленням виготовляють

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...