Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Cartridge Belt: Wide Leather Belt With a Woven Strip Forming the Loops (Boy Mechanic, 1915)
Tex

Створено

Tex

13. листопад 2026FO
4
0
0
0
0

Cartridge Belt: Wide Leather Belt With a Woven Strip Forming the Loops (Boy Mechanic, 1915)

Robert Pound of Lavina, Montana, sent this cartridge belt to The Boy Mechanic, Book 2 (1915): a leather belt about 2-1/2 in wide with a 1 in strip woven through pairs of slits to form a row of loops. Using the strip's free end in the buckle lets the loops be tightened for different sizes.
Початківець
About 2 hours

Інструкції

1

His sizes, and how many loops

Завантаження блокнота Jupyter…
2

Read The Boy Mechanic, Book 2

"Procure a leather belt, about 2-1/2 in. wide and long enough to reach about the waist, also a piece of leather, 1 in. wide and twice as long as the belt."
3

Cut the belt and strip

Cut a leather belt about 2-1/2 in wide and long enough to go round the waist, and a strip 1 in wide and twice as long as the belt. Fix a buckle to one end of the belt and rivet one end of the strip to the belt near the buckle.

Матеріали для цього кроку:

Лимарна шкіраЛимарна шкіра2 штук
Залізна пряжка з язичкомЗалізна пряжка з язичком1 штука
Мідні заклепкиМідні заклепки1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
Пробійник для шкіриПробійник для шкіри
МолотокМолоток
РулеткаРулетка
4

Weave the loops

Cut two slits in the belt, a cartridge's diameter apart. Pass the strip through one slit and back through the other to make a loop. About 1/4 in further on, cut two more slits and form the next loop the same way, and so on along the whole belt.

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
РулеткаРулетка
ОлівецьОлівець
5

Finish the end

Rivet the end of the strip to the belt, or take it into the buckle: then the strip can be drawn up to fit cartridges of different sizes. Punch the holes for the buckle tongue.

Матеріали для цього кроку:

Мідні заклепкиМідні заклепки1 штука

Необхідні інструменти ({count})

Пробійник для шкіриПробійник для шкіри
МолотокМолоток
6

Troubleshooting

Cartridge belt troubleshooting.

Flow

Loading...
7

History and honest limits

From "How to Make a Cartridge Belt" by Robert Pound, Lavina, Mont., in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 55). He gives no slit length and no cartridge size; the slit spacing follows whatever cartridge the belt is for. The tools and metric figures are ours.

Матеріали

3

Необхідні інструменти

5

За цим кресленням виготовляють

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...