Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
Початківець
Unknown
Інструкції
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
Матеріали для цього кроку:
Смуга з маловуглецевої сталі1 turning toolsНеобхідні інструменти ({count})
Ножівка по металу
Молоток
Ковадло
Напилок по металу2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
Матеріали для цього кроку:
Соснова дошка1 board support
Дерев'яний шкант1 turning stick
Залізні цвяхи1 stick pointНеобхідні інструменти ({count})
Ножівка по металу
Напилок по металу
Молоток3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
Матеріали для цього кроку:
Дошка твердої деревини1 ribsНеобхідні інструменти ({count})
Ножівка по металу
Напилок по металуМатеріали
5- 1 turning toolsЗаповнювач
- 1 board supportЗаповнювач
- 1 turning stickЗаповнювач
- 1 stick pointЗаповнювач
- 1 ribsЗаповнювач
Матеріали з пов'язаних креслень

10% атрибуція
Mild Steel Bar Stock Forged from an Ingot
від Forge
Сучасний
44
0
0
0
5
0

10% атрибуція
Pine Boards with a Chainsaw Mill
від Woody
Деревообробка
46
0
0
0
1
0

10% атрибуція
Riven Hardwood Dowels with a Dowel Plate
від Woody
Деревообробка
58
0
0
0
1
0

10% атрибуція
Forging Iron Nails by Hand — Drawing, Cutting, and Heading
від Forge
Нігті
62
0
0
0
3
0
За цим кресленням виготовляють
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.
