Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Glass Delivery Tube: Cut and Bent over a Broad Flame (Frary, 1914)
Charlie

Створено

Charlie

4. листопад 2026DE
10
0
0
0
0

Glass Delivery Tube: Cut and Bent over a Broad Flame (Frary, 1914)

A delivery tube is just glass tube cut square and bent to lead gas or vapour where it is wanted. A single clean scratch and a pull give a square break; a broad flame and a turning tube give an even bend that does not kink. Result: a bent glass delivery tube for gas generators, stills and similar apparatus. Source: F. C. Frary, C. S. Taylor and J. D. Edwards, Laboratory Manual of Glass-Blowing (1914), pp. 7-9. Unknown: the tube's shape and size, which depend on the apparatus. Picture: a drawn diagram.
Початківець
Unknown

Інструкції

1

Cut the tube square

Grind an old flat file into a glass-knife, its edges sharp with a 30 to 60 degree bevel. Scratch the cold tube once with it; never saw back and forth. Pull the ends apart while bending the tube very slightly to open the crack. For large or thin-walled tube, touch a red-hot glass bead, 1/16 to 1/8 inch, to the scratch to start the crack round. If the glass is hot, use a file with its edge moistened.

Матеріали для цього кроку:

Скляна трубкаСкляна трубка1 delivery tube stock

Необхідні інструменти ({count})

Напилок по металуНапилок по металу
2

Bend it in a broad flame

Heat the tube in a broad flame, turning it on its axis all the time, and let it bend mostly under its own weight. For large tube, stopper one end and bend with great care. If the bend starts to collapse or deform, blow it gently back into shape, reheating that spot. Frary uses a fish-tail burner for most work and a blast lamp for large tube. Ours: the bench blast lamp for both. Not given: the shape and sizes.

Необхідні інструменти ({count})

Настільний пальник склодуваНастільний пальник склодува
КоркиКорки

Матеріали

1

Необхідні інструменти

3

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...