МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Grosgrain Ribbon: Close Plain Weave with a Heavy Weft
Tex

Створено

Tex

18. жовтень 2026FO
13
0
0
0
0

Grosgrain Ribbon: Close Plain Weave with a Heavy Weft

Grosgrain is a firm, closely woven plain weave with a heavier weft than warp, which gives it ribs running across the width. It is used for hat bands, facings and waistbands. Historically it was silk or wool; this one is cotton, woven narrow on a rigid heddle loom. The picture: grosgrain ribbons (Wikimedia Commons).
Середній
Two evenings

Інструкції

1

The thread and twine

Spinning the fine warp thread and the heavier twine used as weft.
2

Measure the warp

For a ribbon 2.5 cm wide and 3 m long, wind enough fine warp threads to fill 2.5 cm of the heddle, each 3.5 m long to allow for tying on and loom waste.

Матеріали для цього кроку:

Бавовняна основна ниткаБавовняна основна нитка1 as required

Необхідні інструменти ({count})

Снувальна дошкаСнувальна дошка
РулеткаРулетка
ЛінійкаЛінійка
3

Thread the heddle

Centre the warp in the heddle, one end through each slot and each hole, wind on under even tension and tie on at the front.

Необхідні інструменти ({count})

Ткацький верстат із жорстким бердомТкацький верстат із жорстким бердом
4

Weave with a heavy weft

Wind the twine on the shuttle. Weave plain weave: one pass with the heddle up, one with it down, and beat each pick firmly so the weave is close and the heavy weft forms ribs across the ribbon.

Матеріали для цього кроку:

Бавовняний шпагатБавовняний шпагат1 as required

Необхідні інструменти ({count})

Ткацький верстат із жорстким бердомТкацький верстат із жорстким бердом
ЧовникЧовник
5

Keep the edges straight

Draw each pick snug at the edges so the ribbon keeps its width; measure the width often.

Необхідні інструменти ({count})

ЛінійкаЛінійка
6

Cut off and secure

Cut the ribbon off the loom and knot or stitch both ends so the weft cannot slip off.

Необхідні інструменти ({count})

Кравецькі ножиціКравецькі ножиці
7

Troubleshooting

Grosgrain troubleshooting.

Flow

Loading...

Матеріали

2

Необхідні інструменти

6

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...