Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Child's Pilch: Treeless Saddle With Stuffed Roll, Web Girth Straps and Flock Panel (Hasluck, Saddlery, 1904)
Tex

Створено

Tex

13. листопад 2026FO
4
0
0
0
0

Child's Pilch: Treeless Saddle With Stuffed Roll, Web Girth Straps and Flock Panel (Hasluck, Saddlery, 1904)

A pilch is a child's saddle made without a tree. This is the plain boy's pilch from Paul N. Hasluck's Saddlery (1904): a stiff leather top with a hard-stuffed roll behind, webs underneath carrying the girth straps and the stirrup buckles, and a flock-stuffed panel. He gives no size for the top; the picture is our diagram from his text.
Просунутий
About 2 days

Інструкції

1

His sizes in centimetres

Завантаження блокнота Jupyter…
2

Read Saddlery, ch. IV

"A pilch is the form of saddle used by a boy or girl." He adds that pilches "accommodate themselves to almost any horse, though they lose their shape under a heavy weight".
3

Cut the top

Cut the top somewhat like a saddle panel but smaller, and in a straight line along the back. Put a welt at the joint and stitch it double-handed on the under side. The top can be plain stiff single leather, or covered plain with basil or hogskin (tack a cover coarsely along the edge, then bind it with leather).

Матеріали для цього кроку:

Лимарна шкіраЛимарна шкіра1 штука
Лляна ниткаЛляна нитка1 штука
Бджолиний віскБджолиний віск1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
ШилоШило
Дві лимарські голкиДві лимарські голки
Лимарські лещатаЛимарські лещата
РулеткаРулетка
4

Make the web for the girth and stirrup straps

Take a piece of webbing about 1 ft 3 in long and stitch a 2 in strap, 10 in long, to each end, turning the end of the web in under the stitch. Whip a second piece of web about 1 ft long to the edge of the first, at equal distances from both ends, and fit two chapes and 1 in buckles with the tongues taken off, for the stirrup straps. Stitch this to the lower part of the top, right in the centre. Bring the stirrup buckles forward and cut a hole for each to come through on the outside without the web showing; the holes must be the same distance from the centre on each side. Stitch the web firmly through the top from end to end.

Матеріали для цього кроку:

Попружна стрічкаПопружна стрічка1 штука
Лимарна шкіраЛимарна шкіра1 штука
Залізна пряжка з язичкомЗалізна пряжка з язичком2 штук
Лляна ниткаЛляна нитка1 штука
Бджолиний віскБджолиний віск1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
ОбценькиОбценьки
КрайкорізКрайкоріз
БігувальникБігувальник
Пропановий пальникПропановий пальник
ШилоШило
Дві лимарські голкиДві лимарські голки
Лимарські лещатаЛимарські лещата
РулеткаРулетка
5

Make and fix the roll

Cut linen to the shape and size of the roll, double it and stitch the edges together; stuff it hard with flock and quilt it firmly. It should reach round the back and come to a fine point at each end. Draw it tight round the back of the seat, bringing the points down level at each corner of the flap part of the top, and put a stitch here and there along the bottom through the linen and the top.

Матеріали для цього кроку:

Лляна тканинаЛляна тканина1 штука
Вовняна набивкаВовняна набивка1 штука
Лляна ниткаЛляна нитка1 штука
Бджолиний віскБджолиний віск1 штука

Необхідні інструменти ({count})

НожиціНожиці
ШилоШило
Дві лимарські голкиДві лимарські голки
6

Cover and quilt the roll

Cut hogskin or basil large enough to cover the roll. Raise a stitch along the bottom on both sides of the roll in the cover and run the stitches up and down through the top, drawing the cover down tightly over the roll. Quilt the roll with stitches from side to side, a little tuft of flock under each stitch, drawn tight; fasten the thread securely at the end.

Матеріали для цього кроку:

Свиняча шкіраСвиняча шкіра1 штука
Вовняна набивкаВовняна набивка1 штука
Лляна ниткаЛляна нитка1 штука
Бджолиний віскБджолиний віск1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
ШилоШило
Дві лимарські голкиДві лимарські голки
7

Make and fasten the panel

Make the panel exactly like a saddle panel (see the riding saddle blueprint). Fasten it by putting stitches through the top here and there along the front and round the back near the edge, with a small tuft of flock under each stitch on the panel and every stitch knotted over the flock as you go. Do not fasten the panel right at the bottom of the flaps, but about 5 in from it.

Матеріали для цього кроку:

Овеча шкіра (бейзил)Овеча шкіра (бейзил)1 штука
Вовняна саржаВовняна саржа1 штука
Вовняна набивкаВовняна набивка1 штука
Лляна ниткаЛляна нитка1 штука
Бджолиний віскБджолиний віск1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
ШилоШило
Дві лимарські голкиДві лимарські голки
РулеткаРулетка
8

Stirrup straps, irons and girths

Make a pair of 1 in stirrup straps 1 ft 8 in long, and get a pair of boy's stirrup irons (he says they could be bought tinned for sixpence a pair). A pair of girths 1 ft 6 in and 1 ft 8 in long completes the pilch.

Матеріали для цього кроку:

Лимарна шкіраЛимарна шкіра1 штука
СтременоСтремено2 штук
ПопругаПопруга2 штук

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
Пробійник для шкіриПробійник для шкіри
РулеткаРулетка
9

Troubleshooting

Pilch troubleshooting.

Flow

Loading...
10

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter IV, "Children's Saddles or Pilches", pp. 36-39, read on the scan; the chapter has no figures, so the picture is our own diagram from his text. He gives no size for the top. The reversible heads and the safe for a girl, the girl's slipper stirrup and the crupper web are not made here. The thread, tools and metric figures are ours.

Матеріали

12

Необхідні інструменти

11

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...