Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Horse Hood: Two-Piece Cloth Hood With Ear Covers, Bound Edges and Jaw Strap (Hasluck, Saddlery, 1904)
Tex

Створено

Tex

13. листопад 2026FO
4
0
0
0
0

Horse Hood: Two-Piece Cloth Hood With Ear Covers, Bound Edges and Jaw Strap (Hasluck, Saddlery, 1904)

The hood completes a horse's stable suit of sheet, breast cloth and pad cloth, covering the head and neck. This is the hood from Paul N. Hasluck's Saddlery (1904): two pieces of cloth cut to the horse from about 5-1/4 in below the eye back to the shoulder, with ear covers and eye holes, bound all round and fastened under the jaw. It is cut to fit each horse, so he gives few sizes.
Середній
About 1 day

Інструкції

1

His sizes in centimetres

Завантаження блокнота Jupyter…
2

Read Saddlery, ch. IX

"A hood is needed to complete the suit. A suitable shape is shown by Fig. 29. The hood must be cut to the shape of the horse's neck and head, from a point about 5-1/4 in. below the eye on the nose, then along the ridge of the head and neck to the shoulder, where it should cover the front of the sheet well."
3

Cut the two sides

Cut the hood in two pieces, one for each side (he says sometimes four, with pieces added to the side flaps for size), shaped to the horse from about 5-1/4 in below the eye on the nose, along the ridge of the head and neck to the shoulder, covering the front of the sheet well. Under the neck, cut all round the throat and down under the head so the two sides meet exactly in the centre. Making a paper pattern on the horse first is our suggestion.

Матеріали для цього кроку:

Свіжоткане вовняне сукноСвіжоткане вовняне сукно1 штука

Необхідні інструменти ({count})

Пакувальний крафт-папірПакувальний крафт-папір
ОлівецьОлівець
НожиціНожиці
РулеткаРулетка
4

Cut the ear and eye holes

Cut the holes for the ears, and two holes right opposite the eyes. Put the front cut of the cloth opposite the front of the ear.

Необхідні інструменти ({count})

НожиціНожиці
ОлівецьОлівець
5

Make the ear covers

Make a cover for each ear: the front part about 1 in larger than the face of the ear all round, the back part large enough to pass round the back of the ear and let it go in easily. Whip the edges together and stitch round the hole at the bottom, all the stitches on the outside.

Матеріали для цього кроку:

Свіжоткане вовняне сукноСвіжоткане вовняне сукно1 штука
Лляна ниткаЛляна нитка1 штука
Бджолиний віскБджолиний віск1 штука

Необхідні інструменти ({count})

НожиціНожиці
Дві лимарські голкиДві лимарські голки
6

Join the sides

Whip the edges together level along the top of the neck and over the head, down the front of the face. Join any other piece the same way, and always bind the joint, stitching on both sides.

Матеріали для цього кроку:

Лляна ниткаЛляна нитка1 штука
Бджолиний віскБджолиний віск1 штука

Необхідні інструменти ({count})

Дві лимарські голкиДві лимарські голки
7

Bind the edges

Cut the binding cloth 1-1/4 in wide (cloth, patent or Newmarket binding) and turn it round the edges just enough to catch the first row of stitching, about 1/4 in from the edge. Draw it as flat as possible and stitch another row along the inner edge. Where it puckers too much at a sharp turn, as at the throat, cut the puckers out and stitch edge to edge. Put a strip along the joint on the top of the neck, its ends under the binding, then flat strips 1/2 in wide along the side joints and the points of the ear pieces, and round the bottom to cover the ends and the joint. He notes this work can be done by machine.

Матеріали для цього кроку:

Свіжоткане вовняне сукноСвіжоткане вовняне сукно1 штука
Лляна ниткаЛляна нитка1 штука
Бджолиний віскБджолиний віск1 штука

Необхідні інструменти ({count})

НожиціНожиці
Дві лимарські голкиДві лимарські голки
РулеткаРулетка
8

Fit the jaw strap and strings

Fasten the hood under the jaw with a small strap and buckle. Run cadez strings (ties) from this point to about half-way down the neck on each side, to tie together.

Матеріали для цього кроку:

Лимарна шкіраЛимарна шкіра1 штука
Залізна пряжка з язичкомЗалізна пряжка з язичком1 штука
Бавовняний кухонний шпагатБавовняний кухонний шпагат1 штука
Лляна ниткаЛляна нитка1 штука
Бджолиний віскБджолиний віск1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
ШилоШило
Дві лимарські голкиДві лимарські голки
9

Troubleshooting

Horse hood troubleshooting.

Flow

Loading...
10

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter IX, "Horse Clothing", hood, pp. 70-74, Fig. 29; every fraction was read on the scan. He gives no overall sizes: the hood is cut to the horse. He does not say what cadez strings are made of; cotton string is our choice. The sheets and breast cloth of the suit are not made here. Kersey, the paper pattern, tools and metric figures are ours.

Матеріали

6

Необхідні інструменти

7

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...