Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Snaffle Riding Bridle: Cheeks, Slit Head Strap, Front, Throat Lash and Reins (Hasluck, Saddlery, 1904)
Tex

Створено

Tex

13. листопад 2026FO
3
0
0
0
0

Snaffle Riding Bridle: Cheeks, Slit Head Strap, Front, Throat Lash and Reins (Hasluck, Saddlery, 1904)

The plain riding bridle, "a single head and rein bridle", from Paul N. Hasluck's Saddlery (1904): two cheeks buckled to a snaffle bit, a head strap slit at each end into cheek and throat-lash straps, a front (browband), a throat lash and a pair of buckled reins. Every size is his; the bit is bought. It is the riding counterpart of the cart bridle.
Середній
About 1 day

Інструкції

1

Cutting list

Завантаження блокнота Jupyter…
2

Read Saddlery, ch. VI

"All the stitching must be done from behind, so that the best face of the stitches will be next the horse when the bridle is on."
3

Make the cheeks

Cut two cheeks about 7/8 in wide and 9 in long. Each has a buckle at each end: one on a chape turned down, the other on the flat end of the strap without turning, with the billet underneath. Leave room for a loop before the buckle and the point of the cheek, and set the billet far enough behind the buckle for two loops; put a runner loop on the cheek and stitch another in with the chape. Cut the billets 9 in long. Stitch them in single-handed and back-stitch with linen thread, all from behind. Make one hole in each billet.

Матеріали для цього кроку:

Лимарна шкіраЛимарна шкіра1 штука
Латунна пряжка зі шпеникомЛатунна пряжка зі шпеником4 штук
Лляна ниткаЛляна нитка1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
КрайкорізКрайкоріз
БігувальникБігувальник
Пробійник для шкіри (пробійна вилка)Пробійник для шкіри (пробійна вилка)
ШилоШило
Дві лимарські голкиДві лимарські голки
Лимарські лещатаЛимарські лещата
Оправка для шльовокОправка для шльовок
Пробійник для шкіриПробійник для шкіри
4

Make the head strap

Cut the head strap 1-1/8 in by 1 ft 10 in and slit it 5 in at each end. For a 3/4 in cheek, slit 3/4 in on one side and 3/8 in for a 3/8 in throat lash, with the wide slits on the same side at both ends. Punch four holes in each wide slit and six, closer together, in each narrow one.

Матеріали для цього кроку:

Лимарна шкіраЛимарна шкіра1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
Пробійник для шкіриПробійник для шкіри
РулеткаРулетка
5

Make the front

Cut the front 3/4 in by 1 ft 2-1/4 in from the end of one bend to the other, after bending. Turn it over the head strap and mark a line across close to it, so there is 1 ft 1 in between the cross lines. Stitch the ends down, with a row along each side.

Матеріали для цього кроку:

Лимарна шкіраЛимарна шкіра1 штука
Лляна ниткаЛляна нитка1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
Пробійник для шкіри (пробійна вилка)Пробійник для шкіри (пробійна вилка)
ШилоШило
Дві лимарські голкиДві лимарські голки
6

Make the throat lash

Make the throat lash 3/8 in by 1 ft 7 in after turning down for the buckles. Put two runner loops on it besides the loops at the buckles of each end.

Матеріали для цього кроку:

Лимарна шкіраЛимарна шкіра1 штука
Латунна пряжка зі шпеникомЛатунна пряжка зі шпеником2 штук
Лляна ниткаЛляна нитка1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
ШилоШило
Дві лимарські голкиДві лимарські голки
Оправка для шльовокОправка для шльовок
7

Make the reins

Cut the reins 1 in or 7/8 in by 4 ft. Prepare them for the bit buckles like the bottom of the cheeks, in the flat. Put a 3/4 in covered buckle on the other end of one rein, narrowing its chape to the buckle's width, and narrow the end of the other rein for buckling. Put in the billets, 10 in long, with one loop before the buckle and two behind, "and always put the strong end of the rein in the billet end".

Матеріали для цього кроку:

Лимарна шкіраЛимарна шкіра1 штука
Латунна пряжка зі шпеникомЛатунна пряжка зі шпеником3 штук
Лляна ниткаЛляна нитка1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
ШилоШило
Дві лимарські голкиДві лимарські голки
Оправка для шльовокОправка для шльовок
8

Put it together

Buckle the cheeks to the head strap's wide slits and the throat lash to the narrow ones, run the front over the head strap, buckle the cheeks' lower ends and the reins to the snaffle bit's rings, and buckle the two reins together. Buckled billets let the bit be taken off, which he prefers to stitching the cheeks and reins fast to it.

Матеріали для цього кроку:

ТрензельТрензель1 штука
9

Troubleshooting

Riding bridle troubleshooting.

Flow

Loading...
10

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter VI, "Riding Bridles", the snaffle bridle; every fraction was read on the scan. Not made here: his Pelham, Weymouth, gag, exercising and stallion bridles. The bit is bought. The metric figures are ours.

Матеріали

4

Необхідні інструменти

10

За цим кресленням виготовляють

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...