Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Wishbone-Mast Ice Yacht: 16 ft Backbone, Twin-Pole Mast and Double Lateen Booms (Boy Mechanic, 1919)
Woody

Створено

Woody

13. листопад 2026NO
7
0
0
0
0

Wishbone-Mast Ice Yacht: 16 ft Backbone, Twin-Pole Mast and Double Lateen Booms (Boy Mechanic, 1919)

John F. Pjerrou's ice yacht from The Boy Mechanic, Book 3 (1919), for one or two passengers: a 16 ft spruce backbone on a 12 ft 6 in runner plank, oak runners shod with half-round iron, a mast of two 12 ft poles joined at the head, and two lateen sails on a yard and two 16 ft booms that spread into a V when running before the wind. It takes down for storage.
Просунутий
Several weeks

Інструкції

1

Main sizes and the mast's height

Завантаження блокнота Jupyter…
2

Read The Boy Mechanic, Book 3

"The dimensions given are for a small yacht, and care must be taken, in adapting the design, to maintain proper proportions for stability and safety."
3

Make the backbone and runner plank

Use only the best straight-grained spruce or white pine. Backbone: 4 in thick, 16 ft long and 8 in high at the centre, with a ridge 8 in high and 2 ft 6 in long; taper it from the middle, 5 ft 6 in from the forward end, to 4 in at each end, and fit a three-eye metal ring at the bow (Figs. 1, 5). Runner plank: 2 in thick, 10 in wide, 12 ft 6 in long, tapered to 8 in at the ends. Set the backbone on the plank at right angles, 6 ft from the bow, and clamp them with two strap bolts, washers and nuts (Figs. 2, 3).

Матеріали для цього кроку:

Сосновий пиломатеріалСосновий пиломатеріал2 штук
Металеве кільцеМеталеве кільце1 штука
Скоба-хомутСкоба-хомут2 штук
Плоска шайбаПлоска шайба4 штук
Шестигранна гайкаШестигранна гайка4 штук

Необхідні інструменти ({count})

Ручна пилкаРучна пилка
Ручний рубанокРучний рубанок
СкобельСкобель
Коловорот із перкоюКоловорот із перкою
Розвідний ключРозвідний ключ
РулеткаРулетка
ОлівецьОлівець
4

Fit the guides and forward runners

Bolt guides of straight-grained oak, 1-1/2 by 3 by 14 in, to the plank ends with 5/16 in carriage bolts, and bolt oak chocks at each tapered edge (Fig. 4). Make the forward runners of oak, 1-1/2 by 5 by 36 in, shaped at the ends as drawn, and shoe them with half-round strap iron held by screws with carefully countersunk heads. Pivot them on 5/8 in bolts (5 in long in Fig. 1), nuts to the inner side, with washers and jam nuts, or rivet the bolt ends slightly so the nuts cannot work loose.

Матеріали для цього кроку:

Дошка з білого дубаДошка з білого дуба3 штук
Болт із півкруглою головкоюБолт із півкруглою головкою8 штук
Напівкруглий залізний прутокНапівкруглий залізний пруток2 штук
Шурупи по деревуШурупи по дереву1 штука
Плоска шайбаПлоска шайба4 штук
Шестигранна гайкаШестигранна гайка4 штук

Необхідні інструменти ({count})

Ручна пилкаРучна пилка
Ручний рубанокРучний рубанок
Коловорот із перкоюКоловорот із перкою
Ручний дрильРучний дриль
Набір зенківокНабір зенківок
Ножівка по металуНожівка по металу
Розвідний ключРозвідний ключ
5

Make the stern runner and steering

Make the stern runner of oak, 1-1/2 by 5 by 30 in, shod like the others. Pivot it on a 3/8 in bolt in a hanger of heavy iron strip bent into a U and riveted to a vertical shaft. Put a heavy rubber washer, protected by a metal one, on the shaft; thread its upper end for a washer and nut, slip a section of pipe over the shaft, and clamp the steering handle (2 ft 10 in in Fig. 1) on a squared part of the shaft. The hanger may be forged, or made by a blacksmith.

Матеріали для цього кроку:

Дошка з білого дубаДошка з білого дуба1 штука
Напівкруглий залізний прутокНапівкруглий залізний пруток1 штука
Смуга з маловуглецевої сталіСмуга з маловуглецевої сталі1 штука
Круглий пруток з маловуглецевої сталіКруглий пруток з маловуглецевої сталі1 штука
Залізні заклепкиЗалізні заклепки2 штук
Болт із півкруглою головкоюБолт із півкруглою головкою1 штука
Гумова шайбаГумова шайба1 штука
Плоска шайбаПлоска шайба2 штук
Шестигранна гайкаШестигранна гайка2 штук
Оцинкована сталева трубаОцинкована сталева труба1 штука

Необхідні інструменти ({count})

ГорноГорно
КовадлоКовадло
МолотокМолоток
Слюсарні лещатаСлюсарні лещата
Ножівка по металуНожівка по металу
Ручний дрильРучний дриль
Напилки (ручний напилок)Напилки (ручний напилок)
Розвідний ключРозвідний ключ
6

Build the cockpit

Fix a cockpit 5 ft long and 3 ft wide, with 4 in coaming, to the lower side of the backbone toward the stern; fasten its floor to the backbone with lag screws and fasten the coaming securely. Square corners are easiest; rounded ends with steamed, bent coaming are better. Larger craft may carry it on ribs.

Матеріали для цього кроку:

Соснова дошкаСоснова дошка4 штук
Глухар (шуруп під ключ)Глухар (шуруп під ключ)6 штук
Шурупи по деревуШурупи по дереву1 штука

Необхідні інструменти ({count})

Ручна пилкаРучна пилка
Коловорот із перкоюКоловорот із перкою
Розвідний ключРозвідний ключ
РулеткаРулетка
7

Square up and stay the frame

Line up runners, plank and backbone at right angles so the craft tracks true. Hold them with four 1/4 in wire-rope stays with turnbuckles, from eyes on the bow band and on the bands at the plank ends to an eyebolt below the cockpit (Fig. 2). Loop each rope end and clamp the eye with steel clamps made for the purpose (wire-rope clips); metal thimbles in the loops make a better finish.

Матеріали для цього кроку:

Сталевий тросСталевий трос1 штука
ТалрепТалреп4 штук
НаперстокНаперсток8 штук
Затискач для тросаЗатискач для троса8 штук
Рим-болтРим-болт1 штука

Необхідні інструменти ({count})

Ножівка по металуНожівка по металу
Розвідний ключРозвідний ключ
РулеткаРулетка
8

Make the wishbone mast

Shape two poles of hickory or ash, 3-1/2 in thick at the base and 2 in at the top (12 ft in Fig. 6). Join them carefully at the masthead, bolt them together into an oak breast hook, and reinforce the joint with an iron strap with an eye at its upper end for the forward stay. Step the lower ends in sockets in the runner plank, about 8 ft apart, reinforced with oak mast blocks, and fit their projecting ends with 3 in two-eyed bands for the stays (Figs. 4, 6).

Матеріали для цього кроку:

Дерев'яна жердинаДерев'яна жердина2 штук
Дошка з білого дубаДошка з білого дуба1 штука
Смуга з маловуглецевої сталіСмуга з маловуглецевої сталі1 штука
Болт із півкруглою головкоюБолт із півкруглою головкою2 штук
Шестигранна гайкаШестигранна гайка2 штук

Необхідні інструменти ({count})

СкобельСкобель
Ручний рубанокРучний рубанок
Ручна пилкаРучна пилка
Коловорот із перкоюКоловорот із перкою
СтамескиСтамески
ГорноГорно
КовадлоКовадло
МолотокМолоток
9

Make the yard and booms

Make the yard and two booms of hickory or ash, each 16 ft long, 2-3/4 in at the middle tapering to 1-1/2 in at the ends, with metal rings on the ends against splitting. Bolt loops to their forward ends to engage an eyebolt and ring on the backbone at the bow; set the eyebolt in a slotted plate of 3/16 in sheet iron, fastened by a lever nut (Fig. 5).

Матеріали для цього кроку:

Дерев'яна жердинаДерев'яна жердина3 штук
Металеве кільцеМеталеве кільце6 штук
Рим-болтРим-болт1 штука
Лист маловуглецевої сталіЛист маловуглецевої сталі1 штука
Смуга з маловуглецевої сталіСмуга з маловуглецевої сталі1 штука
Болт із півкруглою головкоюБолт із півкруглою головкою3 штук
Шестигранна гайкаШестигранна гайка3 штук

Необхідні інструменти ({count})

СкобельСкобель
Ручний рубанокРучний рубанок
Ножівка по металуНожівка по металу
Ручний дрильРучний дриль
Напилки (ручний напилок)Напилки (ручний напилок)
Слюсарні лещатаСлюсарні лещата
10

Sew the sails

Make two lateen sails of 8-oz unbleached cotton duck: lap the breadths about 1 in and stitch along the edge (or fold 1 in and double-stitch), the seams parallel to the leech. Reinforce each corner with a triangular patch of duck and bind the edges with 1/4 in tarred rope, using a sailor's palm, a diamond-pointed needle and sail twine, well waxed (the wax is ours: beeswax). Along the yard and boom edges punch holes, set two 3/4 in brass grommet rings in each, one each side, and overcast them with buttonhole stitch. Sew in reef points of 1/8 in cotton rope, whipped at the ends.

Матеріали для цього кроку:

ПарусинаПарусина1 штука
Вітрильна ниткаВітрильна нитка1 штука
Бджолиний віскБджолиний віск1 штука
Смолений тросСмолений трос1 штука
Латунний люверсЛатунний люверс40 штук
Бавовняна линваБавовняна линва1 штука

Необхідні інструменти ({count})

ГардаманГардаман
Вітрильна голкаВітрильна голка
ДіркопробивачДіркопробивач
НожиціНожиці
РулеткаРулетка
11

Set up and rig

Fit the forward ring and strap bolts, the runners and steering, then step the mast, clamp the masthead and fit the bands; set the bottom stays and the masthead stay with the turnbuckles. Lace the sails to yard and booms and fix the forward ends at the bow. Run a 3/8 in halyard from the yard through a pulley at the masthead and a second on the runner plank to cleats by the cockpit, and haul up so the sails set. Lash the main sheets to the boom ends, through pulleys at the stern of the backbone and on the booms about 1 ft and 5 ft from their ends, then to cleats at the cockpit; the second boom needs a duplicate set. Taking down is the reverse.

Матеріали для цього кроку:

КанатКанат1 штука
БлокБлок6 штук
Качка (швартовна)Качка (швартовна)4 штук
Шурупи по деревуШурупи по дереву1 штука

Необхідні інструменти ({count})

Розвідний ключРозвідний ключ
Ручний дрильРучний дриль
12

Finish

Smooth the masts, yard and booms, sandpaper them lightly and give them several coats of spar varnish; paint the other woodwork. He gives the metal fittings two coats of red lead "or other good paint for use on metals exposed to the weather": red lead is a lead poison, so use the other paint.

Матеріали для цього кроку:

Наждачний папірНаждачний папір1 штука
Яхтовий лак (для рангоуту)Яхтовий лак (для рангоуту)1 штука
Олійна фарбаОлійна фарба1 штука

Необхідні інструменти ({count})

Широкий малярний пензельШирокий малярний пензель
13

Sailing and troubleshooting

Ice yacht sailing.

Flow

Loading...
14

History and honest limits

From "A Wishbone-Mast Ice Yacht" by John F. Pjerrou, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, pp. 17-20). He gives no sail outline sizes. The tools, the metric figures and the choice of the non-lead paint he allows are ours.

Матеріали

35

Необхідні інструменти

21

За цим кресленням виготовляють

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...