МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Raw Cane Sugar at the Sugar Mill
Sugarcane is a giant tropical grass grown for the sucrose in its stems. Cut by machine or by hand and chopped into lengths, it goes quickly to the mill, where the juice is pressed out with water or extracted by diffusion. The juice is clarified with lime and heated to destroy enzymes, then concentrated in a series of evaporators. The supersaturated syrup is seeded with sugar crystals so sugar crystallises out. What does not crystallise is molasses, and the crushed fibre, bagasse, is burned to power the mill. The product is raw sugar: crystals with a sticky brown coating, used as it is or refined.
Просунутий
Factory process
Інструкції
1
1
Mill
Mill
Chop the cane into lengths and mill it, extracting the juice with water (or extract by diffusion). Keep the fibre, bagasse, as fuel.
Матеріали для цього кроку:
Цукрова тростина1 as required
Вода1 as requiredНеобхідні інструменти ({count})
Тростинний млин2
2
Clarify
Clarify
Clarify the juice with lime and heat it to destroy enzymes.
Матеріали для цього кроку:
Гідроксид кальцію (гашене вапно)1 as requiredНеобхідні інструменти ({count})
Освітлювач соку3
3
Evaporate
Evaporate
Concentrate the thin syrup in a series of evaporators, then remove further water.
Необхідні інструменти ({count})
Випарний апарат
Варильний котел для цукру4
4
Seed and crystallise
Seed and crystallise
Seed the supersaturated syrup with sugar crystals so the sugar crystallises, then separate and dry the crystals. The remaining liquid is molasses.
Матеріали для цього кроку:
Затравні кристали цукру1 as requiredМатеріали
4- 1 as requiredЗаповнювач
- 1 as requiredЗаповнювач
- 1 as requiredЗаповнювач
- 1 as requiredЗаповнювач
Необхідні інструменти
4- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.



