МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Warp Yarn: Two Wool Singles Plied on a Drop Spindle
Tex

Створено

Tex

14. жовтень 2026FO
14
0
0
0
0

Warp Yarn: Two Wool Singles Plied on a Drop Spindle

On a loom the warp is held under tension the whole time, while the weft carries almost none, so warp yarn has to be strong: spun and plied. Two singles twisted together the opposite way to their spin make a yarn that is stronger and no longer kinks on itself. The picture: plying from a lazy kate, the fingers keeping the two strands apart.
Початківець
An evening per skein

Інструкції

1

Spin two singles the same way

Spin two bobbins of wool singles on the drop spindle, both with the same twist, usually Z (spindle turned clockwise).

Матеріали для цього кроку:

Нефарбована вовняна пряжаНефарбована вовняна пряжа2 мотків

Необхідні інструменти ({count})

Ручне веретеноРучне веретено
2

Set up the lazy kate

Put both bobbins on a lazy kate so they unwind freely, and tie both ends to the spindle's leader.

Необхідні інструменти ({count})

Шпулярник для крученняШпулярник для кручення
Ручне веретеноРучне веретено
3

Ply the opposite way

Turn the spindle the other way (counter-clockwise, S) and let the two strands twist round each other. Keep even tension on both.

Необхідні інструменти ({count})

Ручне веретеноРучне веретено
Шпулярник для крученняШпулярник для кручення
4

Check the balance

Let a length hang in a loop. If it hangs straight, the ply twist balances the spin; if it twists up on itself, adjust the ply twist.

Необхідні інструменти ({count})

Ручне веретеноРучне веретено

Матеріали

1

Необхідні інструменти

2

Пов'язані креслення

Ці креслення діляться знаннями — техніки, матеріали або принципи

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...