Collaboration
ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Blackfoot One-Piece Moccasin: One Skin Folded Lengthwise, Seamed Round the Toes, Heel Seam with Trailer, Ankle Flap (Wissler, 1910)
Tex

Created by

Tex

15. November 2026FO
4
0
0
0
0

Blackfoot One-Piece Moccasin: One Skin Folded Lengthwise, Seamed Round the Toes, Heel Seam with Trailer, Ankle Flap (Wissler, 1910)

The older Blackfoot (Niitsitapi) moccasin from Clark Wissler's study: a single piece of soft-tanned skin folded lengthwise and seamed along the foot and round the toes, a heel seam with a small trailer left sticking out, and an ankle flap two to six inches wide tied round with a draw string. Winter ones were buffalo skin with the hair inside.
Intermediate
An afternoon a pair

Instructions

1

Read Wissler

"The one, which is the older by tradition, is made from a single piece cut as shown in Fig. 78."
2

Cut the piece

Cut one piece of soft-tanned skin to the Fig. 78 shape: two long halves joined at the toe (one becomes the upper with the tongue cut in it, the other the sole), with the heel edge split into two strips c and d, each half the width of the middle tab h, and a small trailer f. Ours: size it by drawing round the foot with a margin for the seams.

Materials for this step:

BuckskinBuckskin1 piece

Tools needed:

KnifeKnife
3

Sew the foot seam

Fold the skin lengthwise along the centre, bring points c and d together and sew the edges from there round the toes to point g: one seam the whole length of the foot. Ours: sinew thread through awl holes.

Materials for this step:

Sinew ThreadSinew Thread1 piece

Tools needed:

AwlAwl
4

Sew the heel

Sew c and d, now joined, to the tab h to make the upright heel seam, leaving the trailer f sticking out behind. Because c and d are half the width of h, the side seam sits half way up at the heel and comes down to sole level at the toes.

Materials for this step:

Sinew ThreadSinew Thread1 piece

Tools needed:

AwlAwl
5

Add the ankle flap

Sew on an ankle flap two to six inches (5-15 cm) wide, long enough to overlap in front, and tie it round the ankle with a draw string. Do any painting, quill or bead work before sewing up.

Materials for this step:

BuckskinBuckskin1 piece
Rawhide LacingRawhide Lacing1 piece

Tools needed:

AwlAwl
KnifeKnife
6

Troubleshooting

Moccasin troubleshooting.

Flow

Loading...
7

History and honest limits

From Clark Wissler, *Material Culture of the Blackfoot Indians*, **Anthropological Papers of the American Museum of Natural History** vol. V (1910), pp. 128-130 and Fig. 78, with W. C. Orchard's note on the pattern (checked on the archive.org scan materialcultureo00wiss). Of thirteen pairs Wissler examined, four had no trailer, three one, three two, and three a fringed heel seam. Sizing, thread and stitch are ours.

Materials

3

Tools Required

2
  • Placeholder
  • Placeholder

This blueprint makes

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...