Collaboration
ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Eight-Pointed Star Kite: Four 4 ft Sticks, Two String Squares and Funnel-Tipped Streamers (Boy Mechanic, 1919)
Spartan

Created by

Spartan

13. November 2026NO
9
0
0
0
0

Eight-Pointed Star Kite: Four 4 ft Sticks, Two String Squares and Funnel-Tipped Streamers (Boy Mechanic, 1919)

Charles M. Miller's eight-pointed star kite from The Boy Mechanic, Book 3 (1919): four 4 ft sticks crossed in two pairs, two string squares making the star outline, a paper cover with pasted-on decorations, and streamers at least 6 ft long ending in paper funnels that steady it instead of a tail.
Intermediate
About 1 day

Instructions

1

The two squares

Loading Jupyter Notebook...
2

Read The Boy Mechanic, Book 3

"Any regular-shaped kite should be laid out accurately, as otherwise the error appears very prominent, and unbalances the poise of the kite."
3

Make the frame

Cut four sticks 1/4 by 1/2 in by 4 ft. Notch each pair a little where they cross, set them at right angles in pairs, lash them with cord and drive a 3/4 in brad at the centre (Fig. 5).

Materials for this step:

Softwood BattenSoftwood Batten4 pieces
CordCord1 piece
NailsNails1 piece

Tools needed:

Hand SawHand Saw
Steel Pocket KnifeSteel Pocket Knife
HammerHammer
Tape MeasureTape Measure
PencilPencil
4

String the star

Run strings from each corner to the second corner beyond, A to C, C to E and so on, making two squares. The squares' sides (A to G, and B to H) must be equal when tied. Tie the strings where they cross each other and the sticks.

Materials for this step:

Kite StringKite String1 piece

Tools needed:

Tape MeasureTape Measure
ScissorsScissors
5

Cover and decorate

Lay plain light-coloured paper out on a smooth floor or table and paste it on as the first cover, turning the outside edges over the string outline and pasting them down. Paste the darker decorations on top: in his design a 1-1/2 in black stripe round the edge, black figures, an octagonal black line, dark-blue points with a gilt stripe on each, and a centre in black, dark blue and gilt. Brilliant, contrasting colours are best.

Materials for this step:

PaperPaper4 sheets
Wheat PasteWheat Paste1 piece

Tools needed:

ScissorsScissors
Glue BrushGlue Brush
RulerRuler
PencilPencil
6

Make the streamers and funnels

Make the outside streamers at least 6 ft long of ribbon or dark lining cambric, balanced carefully. For each funnel end, cut heavy wrapping or cover paper as in Fig. 4 (a half circle of 7 in radius) and roll it into a cone with a 1 in opening at the bottom, stiffened at the top by a hoop of thin reed or fine wire. Make them dark blue with a light-blue cloth fringe (Figs. 2-4). Tie on the flags, and tassels made of cord.

Materials for this step:

Cotton ClothCotton Cloth1 piece
Heavy Paper SheetsHeavy Paper Sheets1 piece
Dried ReedDried Reed1 piece
CordCord1 piece
Wheat PasteWheat Paste1 piece

Tools needed:

ScissorsScissors
CompassCompass
Steel Pocket KnifeSteel Pocket Knife
7

Bridle

Fasten a four-string bridle to the frame at I, J, K and L: the upper strings 18 in and the lower ones 32 in long to where they meet. Fasten the kite line at M and then adjust the bridle.

Materials for this step:

Kite StringKite String1 piece

Tools needed:

Tape MeasureTape Measure
8

Flying and troubleshooting

Star kite flying.

Flow

Loading...
9

History and honest limits

From "An Eight-Pointed Star Kite" by Charles M. Miller, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, pp. 159-160). He does not say what the flags are made of or which paste to use; the gilt is not specified. The tools and metric figures are ours.

Materials

9

Tools Required

9

This blueprint makes

Related Blueprints

These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...