Collaboration
ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
Navajo Blanket Loom: Two Posts, Lashed Braces, Hanging Yarn-Beam, Oak Batten, Heald-Rod and Shed-Rod (Matthews, 1884)
Woody

Created by

Woody

15. November 2026NO
4
0
0
0
0

Navajo Blanket Loom: Two Posts, Lashed Braces, Hanging Yarn-Beam, Oak Batten, Heald-Rod and Shed-Rod (Matthews, 1884)

The ordinary Navajo (Diné) blanket loom as Washington Matthews drew it: two posts in the ground with lashed braces, a yarn-beam hung by loops from a pole roped spirally to the top brace so the warp can be tightened, a cloth-beam tied to the bottom brace, a broad thin oak batten, a heald-rod with cord healds for the lower shed and a plain shed-rod for the upper.
Intermediate
A day

Instructions

1

Read Matthews

"The original distance between the two beams is the length of the blanket."
2

Set the frame

Set two posts firmly in the ground (or use two slender trees standing a convenient distance apart). Lash a brace across near the top and one near the bottom.

Materials for this step:

Green Wood PolesGreen Wood Poles1 piece
RopeRope1 piece

Tools needed:

Post Hole DiggerPost Hole Digger
AxeAxe
3

Hang the beams

Rope a horizontal pole (the supplementary yarn-beam) to the top brace with a rope wound spirally round both. Hang the yarn-beam parallel to it, about 2-3 in. (5-8 cm) below, by a row of loops. Tie the cloth-beam firmly to the bottom brace. Ours: winding the spiral rope tighter or looser sets the warp tension.

Materials for this step:

Green Wood PolesGreen Wood Poles1 piece
RopeRope1 piece
CordageCordage1 piece

Tools needed:

KnifeKnife
4

Mount the warp

Bind the warp's upper border cord to the yarn-beam with a spiral cord, and its lower border cord to the cloth-beam. The space between the beams is the length of the blanket.

Materials for this step:

Undyed Wool YarnUndyed Wool Yarn1 piece
CordageCordage1 piece

Tools needed:

KnifeKnife
5

Make the batten and rods

Shape a broad, thin oak stick as the batten (size ours: about 75 x 7 cm, edges rounded). Tie cord or yarn healds round alternate warp threads onto a heald-rod, for the lower shed; put a stout plain shed-rod through the other shed. A wooden fork serves as the reed.

Materials for this step:

White Oak BoardWhite Oak Board1 piece
Green Wood PolesGreen Wood Poles1 piece
CordageCordage1 piece

Tools needed:

DrawknifeDrawknife
KnifeKnife
6

Troubleshooting

Loom troubleshooting.

Flow

Loading...
7

History and honest limits

From Washington Matthews, "Navajo Weavers", **3rd Annual Report of the Bureau of Ethnology** (1884), pp. 377-378 and Fig. 42 (checked on the archive.org scan 101714660.nlm.nih.gov). The Navajo had no true shuttle: weft went through on a slender twig, or for fine patterns in small balls pushed with the finger. Post and pole sizes, the batten size and the tools are ours.

Materials

5

Tools Required

4

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...