NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
TƯƠNG LAI XANH
KỸ THUẬT NGƯỢC
SCHOOL PROJECTS
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

Building a Charango — The Little High Lute of the Andes
Build a charango: a tiny, high-voiced Andean lute with ten strings in five doubled courses, once famously backed with an armadillo shell and now carved from wood. Build the deep little body, fit the fretted neck, tie the frets and string the five courses. A serious maker build in the fretted lute and why a small box sings high.
Trung cấp
Several hours over several sessions
Hướng dẫn
1
1
A tiny lute that sings high
A tiny lute that sings high
The charango is a small fretted lute with ten strings in five doubled courses. When the Spanish brought the lute-and-guitar family to the Andes, local makers shrank it and famously backed it with an armadillo shell — small body, short strings, a bright high voice.
2
2
Make the little body
Make the little body
Hollow or build a small, deep rounded soundbox — traditionally an armadillo shell, today carved from a block of wood. Keep it small: a little box is what gives the charango its bright, high sound.
Vật liệu cho bước này:
Bloodwood Board1 cái
PVA Wood Glue1 cáiCông cụ cần thiết:
Sloyd Carving Knife3
3
Fit the soundboard
Fit the soundboard
Glue a thin flat softwood soundboard over the open face and cut a round soundhole in it. This top is the speaker that radiates the strings' vibration.
Vật liệu cho bước này:
Dry Softwood Board1 cái4
4
Fit the fretted neck
Fit the fretted neck
Fix a straight neck to the body and lay in the frets — little ridges across the neck. Pressing a string against a fret shortens its speaking length and so raises its note; the fret positions are what set the scale.
Vật liệu cho bước này:
Dowel Rod1 cái
Nylon Fret Line1 cái5
5
String the five courses
String the five courses
Run ten strings in FIVE doubled courses (two strings side by side per course) from a bridge on the soundboard up over the frets to ten tuning pegs. The doubled strings ring together for the charango's shimmering chorus.
Vật liệu cho bước này:
Guitar String Set (Acoustic, Phosphor Bronze)1 cái
Tuning Pegs10 cái6
6
Tune and strum
Tune and strum
Tune the five courses (the classic charango tuning is re-entrant, so it is not simply low-to-high), then strum and pluck. Press behind a fret to change a note, and let the doubled strings shimmer.
7
7
Compendium — the fretted lute, small and high
Compendium — the fretted lute, small and high
The charango is a lute: strings stretched over a soundbox and along a fretted neck, plucked or strummed. Three ideas make it work. First, pitch: a string sounds higher when it is shorter, tighter or lighter, so the player raises a note by pressing the string down onto a FRET, which shortens the part that can vibrate — the same trick as the oud and the guitar, and the reason the frets are spaced the way they are. Second, doubled COURSES: the charango pairs its strings two-by-two, and because no two strings are ever perfectly identical they beat gently against each other, giving that rich shimmering chorus (the same reason a twelve-string guitar or a mandolin sounds so full). Third, and most charango of all, SIZE: the soundbox and the strings are tiny, and small light strings on a short scale vibrate fast, so the whole instrument sits an octave or so above a guitar — bright, chirping, cutting through the thin high-altitude air of the Andes. It descends from the Spanish vihuela and baroque guitar carried across the Atlantic, themselves descendants of the Arabic oud, and it belongs with every soundbox-and-strings instrument from the lyre of Ur onward — the charango is simply that ancient idea shrunk to fit a poncho pocket.
Vật liệu
7- 1 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- Tạm thời
- 10 cáiTạm thời
Công cụ yêu cầu
1- Tạm thời
You can swap these in
Can't get one of the materials? Swap it for an equivalent — these work just as well.
- Instead of Sloyd Carving Knife, try:
Gilder's Knife
Knife
Blunt Collection Knife
Sharp Cinnamon Knife
Sharp Knife (faca)
Sharp Pruning Knife
Small Trimming Knife
Sharp Knife
Steel Pocket Knife - Instead of PVA Wood Glue, try:
Polyurethane Glue
Wood Glue - Instead of Dowel Rod, try:
Pine Dowel Rod Set (12 Diameters)
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
Related blueprints
Other builds that share materials, tools, or techniques with this one.

Making a Quena — The Notched Flute of the Andes

Building a Sheng — The Chinese Free-Reed Mouth Organ

Building a Khaen — The Lao Free-Reed Mouth Organ

Building a Qanun — The Plucked Zither with Microtone Levers

Building a Mariner's Sextant — The Instrument That Conquered the OceansPhysics & Astronomy

Building a Hydraulis — The Water-Powered Pipe Organ of Ancient Greeceengineering
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.