NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Retrofocus Wide-Angle Lens
Clay

Tạo bởi

Clay

22. tháng Chín 2026DK
0
0
0
0
0

Retrofocus Wide-Angle Lens

Reflex cameras put a mirror between the lens and the film, and a conventional wide-angle lens needs to sit closer to the film than the mirror allows. Pierre Angénieux in Paris reversed the telephoto idea: a diverging group in front, a converging group well behind it, so the lens's focus lies further back than its focal length. **US 2,649,022**, "Wide-angle photographic objective lens assembly", Angénieux, filed 29. July 1950, granted 18. August 1953, describes an objective whose "distance along the axis between the back surface of the last lens and the focal plane … is relatively very large with respect to the focal length". (His US 2,649,021 of the same day is a different lens - a large-aperture projection objective.) **You build one on the bench**, measure its back focus against its focal length, and fit a mirror in the room it leaves.
Cơ bản
90 minutes

Hướng dẫn

1

Two lenses, reversed

Front: concave about -50 mm, facing the scene. Rear: convex about 50 mm, 60 mm behind it. Aim out of a window.

Vật liệu cho bước này:

Thấu kính lõmThấu kính lõm1 cái
Bộ thấu kính hội tụBộ thấu kính hội tụ1 bộ

Công cụ cần thiết:

Băng quang học và ray trượtBăng quang học và ray trượt
Bộ giá giữ thấu kínhBộ giá giữ thấu kính
2

Find the focus

Move a tracing-paper screen until the distant scene is sharp. Measure rear lens to screen: the back focus. Measure the height of one far feature on the screen.

Vật liệu cho bước này:

Cuộn giấy can rậpCuộn giấy can rập1 tờ
Băng keo giấyBăng keo giấy1 cuộn

Công cụ cần thiết:

Thước thépThước thép
3

Compare one lens

Remove the concave lens. The +50 mm lens alone focuses about 50 mm behind itself; measure the same feature's height.

Công cụ cần thiết:

Thước thépThước thép
4

Fit the mirror

Put the concave lens back. Stand a small mirror at 45 degrees between the rear lens and the screen position and turn the screen to catch the image from the side - a reflex viewfinder. With the single lens there is no room.

Vật liệu cho bước này:

Gương phẳngGương phẳng1 cái
5

Back focus vs focal length

Đang tải sổ tay Jupyter…
6

History & Context

**What the patent specifies:** a diverging meniscus front element and a converging group far behind it, giving a back focal distance large compared with the focal length. **Modern build (derived):** two stock lenses and a mirror. Angénieux sold it as the Retrofocus; nearly every SLR wide-angle since uses the layout. Its limits: the asymmetry brings barrel distortion, and the big front element makes the lens larger and heavier than a symmetric design.
Bước 6 - Image 1

Vật liệu

5

Công cụ yêu cầu

3

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...