NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Anti-Reflection Coating
Charlie

Tạo bởi

Charlie

22. tháng Chín 2026DE
0
0
0
0
0

Anti-Reflection Coating

Katharine Blodgett at General Electric, working with Irving Langmuir, learned to build soap-like films one molecule-thick layer at a time. Stacking just enough layers onto glass, she made it nearly invisible: light reflected from the top of the film and from the glass beneath cancelled out. **US 2,220,861**, "Reduction of surface reflection", Blodgett, assigned to General Electric, filed 16. June 1938, granted 5. November 1940: a coating whose "optical thickness … corresponds at least approximately to a quarter wave length of visible light" and whose refractive index is "intermediate" between air and the glass. **You measure the reflection a coating removes**, design one in a notebook, and watch quarter-wave interference happen in a soap film.
Cơ bản
90 minutes

Hướng dẫn

1

Measure bare glass

Clip the solar cell to the multimeter (DC mA). In a dim room shine the laser straight onto the cell and note the current. Then bounce the beam off a clean microscope slide, close to perpendicular, onto the cell. Note that current. Never look along the beam.

Vật liệu cho bước này:

Lam kính kèm lamenLam kính kèm lamen1 gói
Solar Cell Mini - 350mVSolar Cell Mini - 350mV1 cái

Công cụ cần thiết:

Bút laserBút laser
Đồng hồ vạn năngĐồng hồ vạn năng
Alligator to Alligator CablesAlligator to Alligator Cables
2

Mix a film solution

Stir 1 part detergent and 1 part glycerin into 10 parts water in a jar. Bend copper wire into a 60 mm loop with a handle.

Vật liệu cho bước này:

Chất tẩy rửa dịuChất tẩy rửa dịu20 ml
Glycerin (thực vật)Glycerin (thực vật)20 ml
Dây đồngDây đồng1 mét

Công cụ cần thiết:

Lọ thuỷ tinhLọ thuỷ tinh
Bộ kìmBộ kìm
3

Watch a film thin

Dip the loop and hold it upright in front of black card, lit by a window behind you. Colour bands slide down as the film drains; at the top a black band appears - a film too thin to reflect.

Vật liệu cho bước này:

Bìa đenBìa đen1 tờ
4

Fresnel, coating design, soap film

Đang tải sổ tay Jupyter…
5

History & Context

**What the patent specifies:** a surface layer of quarter-wave optical thickness with a refractive index between those of the surrounding medium and the glass. **Modern build (derived):** measurement and design only - production coatings are evaporated in vacuum. Blodgett's stearate films were too soft to wipe clean. Alexander Smakula at Zeiss had developed coatings evaporated in vacuum in 1935; that durable route won, and today almost every camera lens and eyeglass is coated, often with many layers. Their limits: a single layer is perfect at only one wavelength, and coatings scratch.
Bước 5 - Image 1

Vật liệu

6

Công cụ yêu cầu

5
Tổng ước tính
Những gì người làm đã mua. Vật liệu không hiện giá thì bạn mua ở đâu tuỳ bạn.
$2.22

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...