NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Cracked C4 Cut: Cracking-Still Gas Liquefied and Split in Four Columns at 200 psi (Eastman, Texas Co., US 2,014,724)
Charlie

Tạo bởi

Charlie

29. tháng Mười 2026DE
4
0
0
0
0

Cracked C4 Cut: Cracking-Still Gas Liquefied and Split in Four Columns at 200 psi (Eastman, Texas Co., US 2,014,724)

The gas from a cracking still is a mixture of light hydrocarbons. Compress it, chill it until it liquefies, and run it through four columns in turn: each column sends one group off its top, and the fourth gives the butanes and butylenes together, the C4 cut. Result: a liquefied butane-butylene cut. Eastman does not give its composition. Source: Eastman, US 2,014,724 (1935). Not given: the cut's make-up, how the impurities are removed, the refrigerant. The gas from Burton's still is used here as the same kind of cracking-still gas. Extremely flammable gases under pressure. Picture drawn by Youblob.
Chuyên gia
1 day

Hướng dẫn

1

Clean the cracking-still gas

Take the gas from a cracking still, preferably after its gasoline has been separated and impurities such as hydrogen sulfide, carbon dioxide and water removed. Eastman does not say how they are removed.

Vật liệu cho bước này:

Khí crackingKhí cracking1 as required

Công cụ cần thiết:

Bình khí chịu áp suấtBình khí chịu áp suất
2

Compress and chill it until it liquefies

Compress the gas, then cool it far enough that it liquefies almost completely.

Công cụ cần thiết:

Máy nén chất khíMáy nén chất khí
Tháp chưng cất đông lạnh sâuTháp chưng cất đông lạnh sâu
Đồng hồ áp suấtĐồng hồ áp suất
3

Take off methane and hydrogen, then the C2s

Run the liquid through a series of fractionating columns at about 200 lbs per square inch. Methane and hydrogen escape from the top of the first column, at about -100 °F; ethylene and ethane from the second, at about -25 °F. Eastman burns the methane and hydrogen as fuel in his cracking furnaces.

Công cụ cần thiết:

Tháp chưng cất đông lạnh sâuTháp chưng cất đông lạnh sâu
Đồng hồ áp suấtĐồng hồ áp suất
4

Take off propane and propylene

Propane and propylene leave the top of the third column, at about +100 °F.

Công cụ cần thiết:

Nồi chưng cất phân đoạnNồi chưng cất phân đoạn
Đồng hồ áp suấtĐồng hồ áp suất
5

Take the butanes and butylenes from the fourth column

The butane and butylene come off the top of the fourth column, at about +200 °F under the same pressure. This is the C4 cut. Ours: condense it into pressure cylinders.

Công cụ cần thiết:

Nồi chưng cất phân đoạnNồi chưng cất phân đoạn
Đồng hồ áp suấtĐồng hồ áp suất
Bình khí chịu áp suấtBình khí chịu áp suất

Vật liệu

1
  • 1 as required
    Tạm thời

Công cụ yêu cầu

5

Bản thiết kế này làm ra

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...