NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Gravity: Measuring the Sugar Before and After Tells You Everything
Alchometer

Tạo bởi

Alchometer

24. tháng Chín 2026GB
26
0
0
0
0

Gravity: Measuring the Sugar Before and After Tells You Everything

Sugar dissolved in water makes it denser. Yeast converts that sugar into alcohol, which is LESS dense than water. So measuring the density before and after fermentation tells you how much sugar was consumed — and therefore how much alcohol was made. That is what a hydrometer does, and it turns brewing from guesswork into measurement. Two readings and a subtraction give the strength, and the same two readings tell you whether fermentation finished or stalled. Which makes it the one instrument that is genuinely not optional. A brewer without gravity readings does not know how strong the drink is, whether it is safe to bottle, or what went wrong when something does.
Cơ bản
2 hours

Hướng dẫn

1

Take the reading properly

Float the hydrometer in a tall sample jar, not in the fermenter. Spin it gently as you let go so the bubbles clinging to it release — bubbles lift it and give a reading that is too low. Read at the bottom of the meniscus, at eye level, exactly as with any volumetric glassware. And take the sample AT the calibration temperature or correct for it: most hydrometers are calibrated at 20 °C, and a hot sample reads low because the liquid has expanded. Never pour the sample back. It has been exposed, it has been in an un-sanitised jar, and returning it risks the whole batch for a few millilitres. Taste it instead — that sample is also your best early warning of an off-flavour.

Vật liệu cho bước này:

NướcNước1 lít

Công cụ cần thiết:

Tỷ trọng kế và ống đong nấu biaTỷ trọng kế và ống đong nấu bia
Bộ nhiệt kế và tỷ trọng kế nấu biaBộ nhiệt kế và tỷ trọng kế nấu bia
Nhiệt kế đọc nhanhNhiệt kế đọc nhanh
2

From two readings to alcohol

Đang tải sổ tay Jupyter…

Vật liệu cho bước này:

NướcNước1 lít

Công cụ cần thiết:

Tỷ trọng kế và ống đong nấu biaTỷ trọng kế và ống đong nấu bia
Máy tính để bànMáy tính để bàn
Máy tính bỏ túiMáy tính bỏ túi
3

A refractometer is fast and lies after fermentation starts

A refractometer needs two drops instead of a full sample jar, works on hot wort, and gives a reading in seconds. For pre-fermentation gravity it is far more convenient than a hydrometer. But alcohol bends light differently from sugar, so once fermentation has started the reading is systematically wrong. Correction formulae exist and they need the original gravity as an input, which means a refractometer alone cannot give a final gravity. That is a textbook systematic error: repeatable, in one direction, invisible from the reading itself. Use the refractometer for the start and the hydrometer for the end, which is each instrument used where it does not lie.

Công cụ cần thiết:

Khúc xạ kế Brix (0-32 %)Khúc xạ kế Brix (0-32 %)
Tỷ trọng kế và ống đong nấu biaTỷ trọng kế và ống đong nấu bia
4

Write every reading down with its date

A single gravity reading tells you very little. Two readings three days apart tell you whether fermentation is finished, and a series tells you how fast it went and whether it slowed unexpectedly. So log OG on brew day, then a reading every few days once the visible activity slows. The criterion for done is two or three identical readings over several days — the dry-to-constant-mass loop from the chemistry batch, applied to a fermenter. Record the temperature with every reading, and the yeast used. Those three columns together turn a brewery into something that improves rather than one that produces a different drink each time.

Công cụ cần thiết:

Tỷ trọng kế và ống đong nấu biaTỷ trọng kế và ống đong nấu bia
Nhiệt kế đọc nhanhNhiệt kế đọc nhanh

Vật liệu

1
  • 2 lít
    Tạm thời

Công cụ yêu cầu

6

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...