NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

Hand Carders: Bent Wire Pins Set in Leather on Beech Paddles
Hand carders are a pair of paddles faced with card cloth: a flexible backing set with close rows of wire pins. Wool brushed between them lines up and comes off as a rolag for spinning. Bend wire into U-shaped staples, push them through pricked leather, bend every pin over at the same angle, and nail the cloth to two beech paddles.
The picture: our diagram, a card from the face and its pins in section.
Trung cấp
Several days
Hướng dẫn
1
1
Paddles
Paddles
Saw two beech paddles about 20 × 10 cm with a handle each, and round the edges with the rasp.
Vật liệu cho bước này:
Gỗ dẻ gai xẻ1 cáiCông cụ cần thiết:
Cưa lọng tay
Giũa thô cho gỗ2
2
Staples
Staples
Cut steel wire into short lengths and bend each into a U, its two legs the pins (step 5 gives the count).
Vật liệu cho bước này:
Dây thép50 mCông cụ cần thiết:
Kìm cắt
Kìm mỏ dẹt3
3
Set the pins
Set the pins
Rule a grid on two pieces of leather and prick two holes for each staple with the awl. Push the staples through from the back, then bend all the pins over the same way at the same height, so they lean toward the handle.
Vật liệu cho bước này:
Da thuộc thảo mộc1 cáiCông cụ cần thiết:
Thước kẻ
Dùi
Kìm mỏ dẹt
Dao rọc giấy4
4
Mount the cloth
Mount the cloth
Stretch each piece over its paddle face and nail it round the edges. The two cards must lean the same way when held face to face in use.
Vật liệu cho bước này:
Đinh sắt24 cáiCông cụ cần thiết:
Búa đầu nêm ngang5
5
Pins for a card
Pins for a card
Đang tải sổ tay Jupyter…
Vật liệu
4- 1 cáiTạm thời
- 50 mTạm thời
- 1 cáiTạm thời
- 24 cáiTạm thời
Bản thiết kế này làm ra
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.


