NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Newton's Rings
Penny

Tạo bởi

Penny

30. tháng Tám 2026DK
29
0
0
0
0

Newton's Rings

Hooke saw them in 1665 and Newton measured them, which is the difference that matters. Press a convex lens onto a flat piece of glass and coloured rings appear around the contact point — in monochromatic light, dark and bright circles; in daylight, a bullseye of spectral colour. The wedge of air between the two surfaces grows in thickness as the square of the distance from the contact. Light reflected from the top of that wedge and from the bottom travels different distances and interferes, so a ring appears wherever the extra path is a whole number of wavelengths. Count the rings and you have measured the gap — in units of half a wavelength, about a third of a micrometre, on apparatus that costs less than a set of drill bits. The centre is DARK in reflection, and that detail defeated Newton. His corpuscles offered no reason why two surfaces in contact should reflect nothing at all. The wave explanation is one line: reflection off the denser medium at the bottom of the film flips the phase, the top reflection does not, and at zero thickness the two cancel exactly. He recorded the effect faithfully for forty years and never could account for it. This is the first blueprint in an interferometry batch because it is the whole idea in its simplest form: stop comparing your object to a ruler and start comparing it to a wave.
Cơ bản
2 hours

Hướng dẫn

1

Make the rings

Clean a plano-convex lens and a glass flat with isopropyl alcohol. One speck of dust holds the surfaces apart and destroys the pattern. Rest the curved face on the flat and press gently at the centre. Illuminate from above through a half-silvered slide at 45 degrees, using a sodium lamp or a white LED behind a narrow-band filter, and look down through the slide with the hand lens.

Vật liệu cho bước này:

Plano-Convex Lens Set (Assorted)Plano-Convex Lens Set (Assorted)1 cái
Microscope Slides with CoverslipsMicroscope Slides with Coverslips1 cái
Isopropyl Alcohol 99%Isopropyl Alcohol 99%30 ml

Công cụ cần thiết:

Hand Lens (10x)Hand Lens (10x)
Optical Bench KitOptical Bench Kit
LED Light SourceLED Light Source
2

Measure eight rings

Photograph the pattern against a steel rule in the same plane, then measure ring DIAMETERS from the image — diameters, not radii, because the centre is the hardest point to locate and cancels out. Take the even-numbered dark rings from 2 to 16. Record each diameter in millimetres.

Công cụ cần thiết:

Steel RuleSteel Rule
Digital Caliper 6-InchDigital Caliper 6-Inch
Desktop ComputerDesktop Computer
3

Fit the radius, and compare the alternatives

Đang tải sổ tay Jupyter…

Công cụ cần thiết:

Desktop ComputerDesktop Computer
4

Compendium: the dark centre

WHY THE CENTRE IS DARK, AND WHY IT MATTERED. At contact the film has zero thickness, so both reflections travel the same distance and ought to add. They cancel, because the reflection at the air-to-glass boundary underneath inverts the wave and the glass-to-air one above does not. Newton recorded this for forty years without explaining it — corpuscles offer no mechanism for a reflection that depends on which material you are entering. STILL USED DAILY. An optical flat on a workpiece under monochromatic light maps its departure from flatness, one half-wavelength per fringe. Gauge blocks, seal faces and lens surfaces are checked this way now — the same observation promoted from curiosity to acceptance test, and the direct ancestor of the Fizeau wedge in blueprint 3.

Vật liệu

3

Công cụ yêu cầu

6

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...