NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Phthalic Anhydride by Air Oxidation of Naphthalene: Gibbs and Conover, 1918
Charlie

Tạo bởi

Charlie

13. tháng Mười 2026DE
5
0
0
0
0

Phthalic Anhydride by Air Oxidation of Naphthalene: Gibbs and Conover, 1918

Harry D. Gibbs and Courtney Conover patented this in 1918, US 1,285,117 (filed 1917), and dedicated it to the public. Phthalic anhydride had been made by oxidising naphthalene with sulphuric acid in the presence of mercury sulphate; they used air instead. Naphthalene vapour mixed with plenty of air is passed over finely divided oxides of vanadium at 350–550 °C, and the phthalic anhydride formed is condensed and separated by fractional sublimation.
Nâng cao
Works process

Hướng dẫn

1

Melt and vaporise the naphthalene

Melt the naphthalene and let it flow continuously, at a measured rate, into a heated chamber where it is volatilised.

Vật liệu cho bước này:

NaphtalenNaphtalen1 as required

Công cụ cần thiết:

Nồi nấu chảy bằng gangNồi nấu chảy bằng gang
Buồng hóa hơiBuồng hóa hơi
Nhiệt kếNhiệt kế
2

Mix the vapour with air

Mix the naphthalene vapour with air in excess of the amount needed to oxidise it to phthalic anhydride, preferably at least four times the amount theoretically required.

Công cụ cần thiết:

Máy thổi khíMáy thổi khí
Buồng hóa hơiBuồng hóa hơi
3

Pass it over vanadium oxide at 350–550 °C

Pass the mixture into a reaction chamber kept at 350–550 °C, preferably 500 °C. There it is forced into close contact with oxides of vanadium in the form of a fine powder, supported on trays, with baffle plates forcing the gas current through it. Keep the gases under pressure only sufficient to make them flow continuously through the chamber. The naphthalene is oxidised to phthalic anhydride, with carbon dioxide and water.

Công cụ cần thiết:

Buồng xúc tác có khayBuồng xúc tác có khay
Vanađi oxitVanađi oxit
Hỏa kếHỏa kế
Máy thổi khíMáy thổi khí
4

Condense the products

Condense the products of the reaction, phthalic anhydride with small portions of other oxidation products of naphthalene, together with the unchanged naphthalene.

Công cụ cần thiết:

Buồng ngưng tụBuồng ngưng tụ
5

Separate by fractional sublimation

Separate the phthalic anhydride from the other oxidation products and the unchanged naphthalene by fractional sublimation.

Công cụ cần thiết:

Thiết bị thăng hoaThiết bị thăng hoa
Nhiệt kếNhiệt kế
6

How much air

Đang tải sổ tay Jupyter…

Vật liệu

1
  • 1 as required
    Tạm thời

Công cụ yêu cầu

9

Bản thiết kế này làm ra

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...